Whisper In The Wind Designs : Fall Dreams by Jenny's Designz, and featuring the Little Wish tube by Arthur Crowe

Wednesday, August 7, 2013

Fall Dreams by Jenny's Designz, and featuring the Little Wish tube by Arthur Crowe - CT Tag, Tut, & FREEBIE cluster frame

3:35 PM | Posted by Unknown | Edit Post

Tutorial using the Fall Dreams scrap kit by Jenny's Designz, and featuring the Little Wish tube by Arthur Crowe

Supplies Needed

Paint Shop Pro - I am using X5, but any should do

The Fall Dreams scrap kit by Jenny's Designz, which can be purchased at Sweet Pin-Ups HERE

The Little Wish tube by Arthur Crowe, which can be purchased at the Arthur Crowe Factory HERE

Any color or gradient and font of your choosing

Okay, let's begin. The first thing you will need to do, is to start a new image in Paint Shop Pro (PSP for short). To do this, look at the top left corner, and click on FILE>NEW> a pop up will open...set width and height to 600, make background transparent, and make sure the transparent box is checked. Click okay, and you now have a blank size base for your tag, already sized and ready to go.

***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***

Alrighty, let's get started building this tag.We will not be adding a mask or a paper to this tag, so we have some transparent areas. First things first, find and open the full-view of the Little Wish tube: look on the side layers menu and hide the sigs, background, tattoos, and piercings..merge the visible..then copy and paste it to your tag. Next, find and open the bridge, and reduce it by 35% and center it towards the bottom of the tag; use the side layers menu and slide the tube back to the forefront. Now find and open the lamp and reduce it by 15%. Place it on the right side and then duplicate it and flip it horizontally and place this one on the left side.

Now find and open the bush and place at the bottom of the right lamp..size down by 80%. Duplicate the bush..duplicate again and flip it horizontally and duplicate one more time. Repeat this process at the bottom of the left lamp. Now repeat the process on both sides on the insides of the bushes we just placed at the bottom of the lamps. Next, find and open the element #4 and leave the size as is...duplicate it and flip it horizontally and place at the top center of the tube. Slide the tube back to the forefront. Now find and open the doodle and reduce it by 85% and place on the left outside of the lamp...duplicate..duplicate again and flip horizontally, and duplicate one more time. Repeat this process on the outer side of the right side lamp.

Now find and open the leaf butterfly and reduce it by 90% and place on the bottom left bush at the bottom of the lamp pole...duplicate and move over to the next bush...now duplicate and flip it horizontally and move to the next bush on the right side...duplicate one more time and place on bush at bottom of the right side lamp post. Now find and open the flower #5 and reduce it by 80% and place it on the right side where the bench meets the pole, duplicate it and flip it horizontally to make it fuller/ repeat on the left side. Next find and open the flower # 2 and reduce it by 80% and place underneath the flower #5 and out close to the edge. repeat on the left side. Now find and open the flower # 3 and reduce it 90% and place it on the right side beside flower #2. Repeat on the left side.

Now find and open the acorns and reduce them by 95% and place it on the bottom left in the open space between bushes...duplicate and flip it horizontally and ad on right side. Now find and open the kitty and reduce her by 85% and place her on the bridge on the right side of the tube. Now find and open the bird and reduce it by 75% and place on the top left of the bridge. Now find and open the butterflies 2 and reduce them by ab out 35% and place it on the top right and the duplicate it, flip it horizontally and add it to top left.

Now find and open the snail and reduce it by 95% and place it on the right top of the bridge, towards the left. Now find and open the bird #2 and reduce it by 85% and place it to the right of the snail, slightly angled. Now find and open the hay and increase the size by 40% and place it behind the bridge; use the side layers menu and slide it all the way to the back. ow find and open the clock and increase it 20% and center it behind the top 1/2 of the tube. Lastly, find and open the butterfly 1 and reduce it by 95% and then place it on the top left by the pole...duplicate and flip it horizontally and place on the top by the right pole.

You did it! You now have finished this tag. You will need to add copy wright info to your tag, as it is the law. Finally, add a name in any font and color of your choosing.

I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to meat robynebutts@gmail.com, so I can place it on my blog.

Hugs and blessings,

Robyne

Matching timeline cover I created using the Fall Dreams scrap kit by Jenny's Designz, which can be purchased at Sweet Pinup HERE and the Little Wish tube by Arthur Crowe, which can be purchased at Arthur Crowe's Factory HERE

Preview of the gorgeous Fall dreams kit by Jenny's Designz!

Preview of the freebie cluster frame I created using the Fall Dreams kit by Jenny's Designz!

FREEBIE cluster frame! You can download this frame by simply right-clicking on the image below, and saving it to your computer. Please do NOT claim as your own work; either link back here to my blog, or to the shop link where this kit can be purchased...thank you!