Wednesday, April 30, 2014
Monday, April 28, 2014
Preview of the gorgeous Pirate scrap kit by P-O Concept!
Preview of the awesome Pirate tube by Danny Lee!
CT PTU Tut for the Pirate scrap kit by P-O Concept, and the Pirate tube by Danny Lee!
Materials Needed
The Pirate scrap kit by P-O Concept, which can be purchased at S&CO HERE
The Pirate tube by Danny Lee, which can be purchased at S&CO HERE
Mask - 250 by Wee Scotts Lass, which can be downloaded on the blog HERE
PSP - I am using X5, but any should do
***This tutorial assumes you have a working knowledge of PSP***
Okay, let's begin. Let's create our mask. Open whatever mask you choose to use; I have chosen a mask by WSL. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>700x700 and transparent needs to be checked. I chose to use a paper for the mask, so copy and paste paper 10 to the new image. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens...click on the title of the mask you chose in the drop down menu. Now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) Just copy and paste it to the tag, centering it.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
Next, find and open el 75, and leaving the size as is, place it on the bottom right of the mask...D and FH and place on the bottom left...D both sides and move down. Next, find and open the el 12, and leaving the size as is, place it on the right side...FH...D and FH and place on the left side. Next, find and open the full-view capa 2 of the tube, reduce her by 35% and center her on the sand. Go back to the tube and copy and paste the close up to the top left of the mask layer...reduce to fit, erasing any overhang...invert and add a screen blend mode.
Next, find and open the el 77, and reduce it by 20%..FH and place it on the bottom right. Next, find and open the el 27, and reduce it by 35%, and place it in the water on the left side. Next, find and open the el 7, and reduce it by 40%...FH and place it on the left side, in the sand. Next, find and open the el 94, and reduce it by 65%, and place it on the left side, on the log posts.
Next, find and open the el 1, and reduce it by 40%, and place it in the sand, on the bottom right. Next, find and open the el 26, and reduce it by 30%, and place it on the bottom right, in front of the barrel. Next, find and open the 71, and reduce it by 40%, and place it on the bottom right, behind the chest. Next, find and open the el 57, and reduce it by 85%, FH, and place it on the bottom left, in front of the log posts.
Next, find and open the el 16, and reduce it by 75%, and place it on the right side, on top of the barrel. Next, find and open the el 74, and reduce it by 85%, and place in the sand, on the left side. Next, find and open the el 21, and leaving the size as is, and place it on the top right, 1/2 hidden behind the tree. Next, find and open el 76, and reduce it by 85%, and place it on the bottom left, behind the chain and anchor.
Next, find and open the el 92, and reduce it by 80%, and place it on the bottom right, under the trunk. Next, find and open the el 67, and reduce to fit on the barrel. Next, find and open the el 41, and place it half hidden behind the sand. Next, find and open the el 3, and reduce it by 85%..FH, and place in front of the barrel.
Next, find and open el 54, and reduce it by 95%, and place it on the bottom right. Next, find and open el 44, and reduce it by 85%, and place on the left side, on the grass that is in front of the log posts. Next, find and open el 42, and reduce it by 90%, and place it on the bottom left..FH..D and FH and reduce another 5% and place on the bottom right. Next, find and open el 72, and reduce it by 90%, and place on the net, on the bottom left.
Lastly, add 3D drop shadows wherever you would like them to be....I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add the copyright information (VERY IMPORTANT)!!
You did it! You now have finished this tag. Finally, add a name in any font and color of your choosing. I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to me at robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Saturday, April 26, 2014
Preview of the stunning Forbidden Memories scrap kit by Kissing Kate!
Preview of the beautiful Dress White tube by Andy Cooper!
CT PTU Tut for the Forbidden Memories scrap kit by Kissing Kate, and the Dress White tube by Andy Cooper.
Materials Needed
The Forbidden Memories scrap kit by Kissing
Kate, which can be purchased at S&CO HERE
The Dress White tube by Andy Cooper, which can be purchased at S&CO HERE
Mask - 139 by Wee Scotts Lass, which can be downloaded on the blog HERE
PSP - I am using X5, but any should do
***This tutorial assumes you have a working knowledge of PSP***
Okay, let's begin. Let's create our mask. Open whatever mask you choose to use; I have chosen a mask by VWSL. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>700x700 and transparent needs to be checked. I chose to use a paper for the mask, so copy and paste paper 2 to the new image. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens...click on the title of the mask you chose in the drop down menu. Now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) Just copy and paste it to the tag, centering it.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
Next, find and open frame #1, increase it by 15%, and center it on the mask. Next, find and open the close up view of the Dress White tube, reduce it by 30% and FH and place on the frame, a bit to the right. Next, find and open paper 7, and place it behind the frame...erase all outside the frame. Next, we will add the flowers to the frame; open the following elements and place them sporadically on the frame where you like them: 37, 28, 26, 71, 1, 59, 24, 9, and 18.
Next, find and open the el 38, and reduce it by 80%, and place at the bottom right of the tube. Next, find and open the el 69, and reduce it by 95%, and place it on top of the flowers on the left bottom...D and FH and place on the top right. Next, find and open the el 17, and reduce it by 95%, and place on top of the flowers on the top left...D and DH and place on the bottom right. Next, find and open the el 68, and reduce it by 98%, and place on the flowers on the bottom left..D and FH and place on the top right.
Next, find and open the el 14, and reduce it by 70%, and place it on the left bottom of the frame, to the left of the Polaroid pic. Next, find and open the el 64, and reduce it by 80%, and place on top of the jewelry box. Next, find and open the el 31, and reduce it by 90%, and place on top of the jewelry box, in front of the books. Next, find and open the el 25, and reduce it by 60%, and place in front of the jewelry box, at the bottom.
Next, find and open the el 54, and reduce it by 90%, and place across the top and bottom of the polaroid. Next, find and open the el 62, and reduce it by 85%, and place on the bottom right of the jewelry box. Next, find and open the el 39, and reduce it by 90%, and place on the bottom right of the polaroid. Next, find and open the el 65, and reduce it by 95%, and place it in front of the jewelry box.
Next, find and open the el 57, and reduce it by 90%, and place it on the bottom left. Next, find and open the el 3, and reduce it by 25%, and place it on the bottom right, on top of the frame layer...D and FH and place on the left. Next, find and open the el 41, and reduce it by 90%, and place on the jewelry box. Next, find and open the el 7, and reduce it by 30%, and place it across the bottom, in front of the pocket watch.
Lastly, add 3D drop shadows wherever you would like them to be....I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add the copyright information (VERY IMPORTANT)!!
You did it! You now have finished this tag. Finally, add a name in any font and color of your choosing. I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to me at robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Preview of the wicked Darkness kit by Dran Design!
CT PTU Tut for the Darkness scrap kit by Dran Design!
Materials Needed
The Darkness scrap kit by Dran Design, which can be purchased at S&CO HERE
Mask - 152 by Wee Scotts Lass, which can be downloaded on the blog HERE
PSP - I am using X5, but any should do
***This tutorial assumes you have a working knowledge of PSP***
Okay, let's begin. Let's create our mask. Open whatever mask you choose to use; I have chosen a mask by Vix. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>700x700 and transparent needs to be checked. I chose to use a paper for the mask, so copy and paste paper 3 to the new image. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens...click on the title of the mask you chose in the drop down menu. Now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) Just copy and paste it to the tag, centering it.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
Next, find and open el 47, and reduce it by 20%, and place it on the bottom left of the tag...D and FH and place on the bottom right. Next, find and open the el 2 poser, and reduce her by 15% and place her centered on the grass. Next, find and open el 1, and reduce it by 30%, and place it in the top left corner. Next, find and open el 3, and reduce it by 80%, and place it on the top left.
Next, find and open the el 38, and reduce it by 10%, and place it on the bottom 1/2 of the mask...D and FH and place on the top 1/2 of the mask. Next, find and open the el 11, and reduce it by 60%, and place it on the bottom left, behind the grass..D and FH and place on the bottom right. Next, find and open the el 19, and reduce it by 40%, and place on the right side, behind the candles. Next, find and open the el 44, and reduce it by 30%, and place it on the bottom right.
Next, find and open the el 18, and reduce it by 40%, and place it on the left side by the tree...FH. Next, find and open the el 20, and reduce it by 80%, and place it on the bottom left. Next, find and open the el 34, and reduce it by 85%, and place on the bottom left, by el 20. Next, find and open the el 35, and reduce it by 90%, and place it on the bottom right, in front of the trunk.
Next, find and open the el 45, and reduce it by 75%, and place it on the bottom left, in front of the books. Next, find and open the el 32, and reduce it by 85%, and place it on the left, behind the books..D and FH, and place on the right, behind the trunk...go back to the left one...D and decrease another 10%, and place to the right of the first one. Next, find and open the el 64, and reduce it by 80%, and place on the bottom right, in front of the trunk.
Next, find and open the el 36, and reduce it by 75%, and place it on the bottom right, in front of the left side of the trunk. Next, find and open the el 30, and reduce it by 90%, and place on the bottom right, against the trunk. Next, find and open the el 40, and reduce it by 60%, and place on the bottom right, behind the trunk...D and FH and place on the left. Next, find and open the el 39, and reduce it by 70%, and place on the statue.
Next, find and open el 14, and reduce it by 85%, and place in the tree. Next, find and open el 15, and reduce it by 85%, and place it in the bottom left corner...D and FH and place in the bottom right corner. Next, find and open el 49, and leaving the size as is, and place it on the right side. Next, find and open el 12, and reduce it by 80%, and place on the book, bottom right.
Lastly, add 3D drop shadows wherever you would like them to be....I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add the copyright information (VERY IMPORTANT)!!
You did it! You now have finished this tag. Finally, add a name in any font and color of your choosing. I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to me at robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Friday, April 25, 2014
Preview of the gorgeous and fun Tea Time tube by Danny Lee!
Preview of the beautiful and witty Tea Time kit by Designs By Joan!
CT PTU Tut for the Tea Time tube by Danny Lee, and the Tea Time kit match by Designs By Joan!
Materials Needed
The Tea Time tube by Danny Lee, which can be purchased at S&CO HERE
The Tea Time scrap kit by Designs By Joan, which can be purchased at S&CO HERE
Mask - 250 by Wee Scotts Lass, which can be downloaded on the blog HERE
PSP - I am using X5, but any should do
***This tutorial assumes you have a working knowledge of PSP***
Okay, let's begin. Let's create our mask. Open whatever mask you choose to use; I have chosen a mask by Vix. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>700x700 and transparent needs to be checked. I chose to use a paper for the mask, so copy and paste paper 2 to the new image. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens...click on the title of the mask you chose in the drop down menu. Now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) Just copy and paste it to the tag, centering it.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
Next, find and open el 82, reduce it by 10%, and place it across the bottom. Next, find and open the full-view of the Tea Time tube, reduce her by 35%, and center her on the floor.
Next, find and open the el 14, and reduce it by 25%, and place it on the left side. Next, find and open the el 26, and reduce it by 40%, and place it on the right side, on the floor. Next, find and open the el 4, and reduce it by 80%, and place it on the bottom left. Next, find and open the el 39, and reduce it by 85%, and place it on the table.
Next, find and open the el 18, and reduce it by 90%, and place it on the table. Next, find and open the el 28, and reduce it by 80%, and place it on the bottom left. Next, find and open the el 22, and reduce it by 50%, and place it on the bottom right. Next, find and open the el 17, and reduce it by 60%, and place it on top of the tree.
Next, find and open the el 8, and reduce it by 30%, and place it angled on the top right. Next, find and open the el 73, and leaving the size as is, place it on the right side on the mask...D and place on the left. Next, find and open the el 15, and reduce it by 70%, and place it on the bottom left, in front of the mushrooms. Next, find and open the el 37, and reduce it by 60%, and place it on the bottom right.
Next, find and open the el 42, and reduce it by 70%, and place it on the table. Next, find and open the el 59, and reduce it by 70%, and place it on the bottom right, by the books. Next, find and open the el 85, and reduce it by 25%, and place it on the bottom left. Next, find and open the el 72, and reduce it by 90%, and place it on the bottom right, by the cups.
Next, find and open el 74, and reduce it by 80%, and place it on the bottom left, behind the hat. Next, find and open el 45, and reduce it by 75%, and place it on the bottom right, on the books. Next, find and open el 12, and reduce it by 70%, and place it angled on the bottom right. Next, find and open el 87, and reduce it by 70%, and place sporadically on the mask layer.
Next, find and open the el 78, and reduce it by 95%, and place on the books. Next, find and open el 51, and reduce it by 20%, and place it on the right side. Next, find and open el 38, and reduce it by 95%, and place it on the bottom right, in front of books. Next, find and open el 81, and reduce it by 60%, and place it on the table. Next, find and open el 76, and reduce it by 90%, and place in the left side of the tree...D Dh and place on the right side.
Next, find and open el 89, and leaving the size as is, place it on the background layer. Next, find and open el 35, and reduce it by 80%, and place it on the top right, behind the umbrella. Next, find and open el 6, and reduce it by 90%, and place it on the bottom left, in front of the hat. Next, find and open el 80, and reduce it by 40%, and place on the top right, on the umbrella. Next, find and open el 90, and leaving the size as is, place it on the floor on the left of the tube...D and FH and place on the right.
Lastly, add 3D drop shadows wherever you would like them to be....I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add the copyright information (VERY IMPORTANT)!!
You did it! You now have finished this tag. Finally, add a name in any font and color of your choosing. I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to me at robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Preview of Template 23 made by me, which you can download
Preview of the stunning City Queen tube by Andy Cooper!
Preview of the gorgeous City Queen scrap kit by Disturbed Scraps!
CT PTU Tut for the City Queen tube by Andy Cooper, and the City Queen kit match by Disturbed Scraps!
Materials Needed
The City Queen tube by Andy Cooper, which can be purchased at S&CO HERE
The City Queen kit by Disturbed Scraps, which can be purchased at S&CO HERE
Template # 23 made by me, which you can download HERE
Mask - 404 by Vix Masks, which can be downloaded on the blog HERE
PSP - I am using X5, but any should do
***This tutorial assumes you have a working knowledge of PSP***
Okay, let's begin. The first thing you want to do is open the template #13 that was made by me. Then, let's create our mask. Open whatever mask you choose to use; I have chosen a mask by Vix. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>700x700 and transparent needs to be checked. I chose to use a paper for the mask, so copy and paste paper 9 to the new image. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens...click on the title of the mask you chose in the drop down menu. Now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) Just copy and paste it to the tag, reduce the size by 60%, and place on the top left...FV...duplicate and move down...keep duplicating and moving around until all areas you wish to have a mask in are covered.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
The next thing we want to do is to start adding our elements to make this tag come to life!! First, we need to put our papers to our template. The papers should be as follows: paper 12 on rasters 6, 3, C3, 8, C8, and 11, paper 2 on rasters 5, 7, 2, and 9, paper 7 on rasters 4, C4, and 10, and paper 8 on the word art.
Next, find and open the full-view of the City Queen tube. Copy and paste her to the tag; reduce her by 25% and center her on the tag. Now go back and open the close up view....copy and paste it to the left bottom square...reduce to fit and invert...repeat for the other square but FH. Now add a canvas simple texture to both close ups.
Next, find and open the el 54, and reduce it by 20%, and place it centered at the bottom. Next, find and open the el 34, and reduce it by 40%, and place it on the right side. Next, find and open the el 42, and reduce it by 60%, and place it on the bottom right. Next, find and open the el 40, and reduce it by 70%, and place it on the bottom left.
Next, find and open the el 5, and reduce it by 85%, and place it on the bottom right, on the cone...D and FH and place on the left. Next, find and open the el 67, and reduce it by 85%, and place it on the bottom left, by the box. Next, find and open the el 72, and leaving the size as is, place it on the left side. Next, find and open the el 61, and reduce it by 70%, and place on the circles, behind the tube.
Next, find and open the el 74, and reduce it by 80%, and place it on the top left. Next, find and open the el 24, and reduce it by 80%, and place it on the bottom left, by the drink. Next, find and open the el 23, and reduce it by 85%, and place it on the bottom right, by the cone. Next, find and open the el 27, and reduce it by 80%, and place it angled on the bottom right.
Next, find and open the el 26, and reduce it by 25%, and place it on the bottom right, against the fence...D and FH and place on the left. Next, find and open the el 48, and leaving the size as is, place it on the top left. Next, find and open the el 22, and reduce it by 95%, and place it by the other flowers in the bottom corners. Next, find and open the el 32, and reduce it by 90%, and place it on the sides of the close ups.
Next, find and open el 63, and reduce it by 80%, and place it on the top right under the lamp...place on the left side of the square..D and place on the right side. Next, find and open el 35, and reduce it by 80%, and place it on the bottom right, by the tube's feet. Next, find and open el 19, and reduce it by 20%, and place it angle don the bottom left, under the other elements. Next, find and open el 14, and reduce it by 90%, and place it on the top right.
Next, find and open the el 68, and reduce it by 90%, and place it on the bottom left by the candle..FH. Next, find and open el 85, and reduce it by 85%, and place it top center, behind the tube's head. Next, find and open el 70, and reduce it by 15%, and place it on the bottom right...D. Next, find and open el 2, and reduce it by 80%, and place it on the bottom left. Next, find and open el 10, and reduce it by 90%, and place it on the left side, by the close up.
Next, find and open el 57, and reduce it by 90%, and place it on the right side, by the close up. Next, find and open el 66, and reduce it by 40%, and place on the bottom right, on top of the feather...D 2 times. Next, find and open el 45, and reduce it by 70%, and place it on the top left. Next, find and open el 41, and reduce it by 70%, and place it on top of the pink leave son the left bottom...D and FH and place on the right.
Lastly, add 3D drop shadows wherever you would like them to be....I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add the copyright information (VERY IMPORTANT)!!
You did it! You now have finished this tag. Finally, add a name in any font and color of your choosing. I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to me at robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Thursday, April 24, 2014
Preview of the gorgeous and unique Summer Beauty tube by Alfadesire!
Preview of the sweet Bearly Spring kit by Dees'Sign Depot!
CT PTU Tut for the Summer Beauty tube by Alfadesire, featuring the Bearly Spring scrap kit by Dees'Sign Depot.!
Materials Needed
The Summer Beauty tube by Alfadesire, which can be purchased at PFD HERE
The Bearly Spring scrap kit by Dees'Sign Depot., which can be purchased at her shop HERE
Mask 105 by Wee Scotts Lass, which can be downloaded on her blog HERE
PSP - I am using X5, but any should do
***This tutorial assumes you have a working knowledge of PSP***
Okay, let's begin. The first thing you want to do is to create our mask. Open whatever mask you choose to use; I have chosen a mask by WSL. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>700x700 and transparent needs to be checked. I have chosen to use a paper for this mask...so open paper 10, and copy and paste it to the new image. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens..click on the title of the mask you chose in the drop down menu. Now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) Just copy and paste it to the tag, and center it.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
Okay, let's get started! Find and open el 5 the frame, leaving the size as is, and center it on the new image. Next, find and open the Summer Beauty tube, make her with the orange and yellow layers...copy and paste her to the tag on top of the frame...reduce her by 25%, and erase the legs that go beyond the frame.
Next, find and open the el 31, and reduce it by 30%, and place it at the bottom of the tube...FV. Next, find and open the el 25, and leaving the size as is, place it on the bottom half of the frame..D and FV and place on the top half. Next, find and open the el 5, and reduce it by 90%, and place them sporadically on the frame. Next, find and open the el 6, and reduce it by 90%, and place sporadically on the frame.
Next, find and open the el 23, and reduce it by 70%, and place it on the bottom left. Next, find and open the el 32, and reduce it by 70%..FH and place on the bottom right. Next, find and open the el 12, and reduce it by 95%, and place sporadically on the frame. Next, find and open the el 48, and reduce it by 40%, and place it centered at the bottom. Next, find and open el 39, and reduce it by 98%, and place them sporadically on the frame.
Next, find and open the el 11, and leaving the size as is, place it bottom center on the white flowers. Next, find and open the el 36, and place on the mask layer on the left..D and FH and place on the right. Next, find and open the el 40, and reduce it by 70%, and place centered on the bottom bow. Next, find and open el 18, and reduce it by 75%, and place on the top left side of the frame...D and FH and place on the right. Next, find and open el 29, and reduce it by by 70%, and place it on the bottom left..D and FH and place on the right...D and FH and place under the right side of the bottom white flowers..D FH and place on the left.
Next, find and open the el 19, and reduce it by 95%, and place it on the top right..FH and place on bottom left. Next, find and open the el 40, and reduce it by 98%, and place sporadically on other flowers. Next, find and open the el 15, and reduce it by 90%, and place on both sides on flowers. Next, find and open the el 16, and reduce it by 95%, and place on the top left and bottom right. Next, find and open el 38, and reduce it by 98%, and place them sporadically, Next, find and open el 8, and reduce it by 95%, and place them sporadically. next, find and open el 19, and reduce it by 80%, and place on the bottom of the bottles.
Lastly, add 3D drop shadows wherever you would like them to be....I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add the copyright information (VERY IMPORTANT)!!
You did it! You now have finished this tag. Finally, add a name in any font and color of your choosing. I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to me at robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Subscribe to:
Posts
(Atom)
Licensed Reseller
Beautiful Blog Award
Designer That Inspires Award
Blog I Love Award
Rawk My Socks Award
CU License Tagging Obsessions
Niqui Designs CU License
CU License Scraps Dimensions
DzinesByMelz CU License
Anorie's CU License
CU License Lacarolita's Designz
CU License Tezza'a Dezignz
CU License Scrap and Tubes
Cakie Pot Pie CU License
Denise Creationz CU License
EW CU License
FDM CU License
More shops I CT for & Love
"
