Whisper In The Wind Designs : CT PTU TUT for Trinita and Hania's Design - Sexy Bunny tube and Sexy Bunny scrap kit!

Friday, April 4, 2014

CT PTU TUT for Trinita and Hania's Design - Sexy Bunny tube and Sexy Bunny scrap kit!

7:49 AM | Posted by Unknown | Edit Post

Preview of the stunning Sexy Bunny tube by Trinita!

Preview of the gorgeous kit match Sexy Bunny by Hania's Design!

CT PTU Tut for the Sexy Bunny tube by Trinita, and the kit match Sexy Bunny by Hania's Design

Materials Needed

The Sexy Bunny scrap kit by Hania's Design, which can be purchased at Hania's shop HERE

The Sexy Bunny tube by Trinita, which can be purchased at PFD HERE

Mask 62 by Creative Misfits, which can be downloaded on their blog HERE

PSP - I am using X5, but any should do

***This tutorial assumes you have a working knowledge of PSP***

Okay, let's begin. The first thing you want to do is open whatever mask you choose to use; I have chosen a mask by CM. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>700x700 and transparent needs to be checked. I chose to use a paper for the mask...so open paper 1, and copy and paste it to the new image. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens..click on the title of the mask you chose in the drop down menu. Now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) Just copy and paste it to the tag, leaving the size as is.

***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***

Next, find and open the Sexy Bunny tube, and copy and paste her to the tag. Reduce her by 30%, and center her at the bottom.

Next, find and open the el 38, and leaving the size as is, place it centered near the bottom. Next, find and open the el 88, and reduce it to fit the length of the fence and place on the right; D and FH and place on the left. Next, find and open the el 86, and reduce it by 70%, and place it on the bottom right, partially behind the tube; D and FH and place on the left side. Next, find and open the el 64, and reduce it by 80%, and place it on the bottom right.

Next, find and open the el 47, and leaving the size as is, place it on the right side, against the fence. Next, find and open the el 89, and reduce it by 70%, and place it on the bottom left. Next, find and open the el 55, and reduce it by 90%, and place it on the bottom left, on top of the log. Next, find and open the el 9, and leaving the size as is, place it angled against the left side of the fence. Next, find and open the el 1, and reduce it by 35%...FH and angle it on the ladder.

Next, find and open the el 25, and reduce it by 70%, and place it on the top left; D, FH, and place on the top right. Next, find and open the el 40, and reduce it by 95%, and place it on the left side, on the ivy on the ladder. Next, find and open the el 17, and reduce it by 70%, and place it on the bottom right, against the fence. Next, find and open the el 68, and leaving the size as is, place it on the right side, on top of the fence. Next, find and open the el 58, and reduce it by 90%...FH and place on the bottom right, behind the baskets.

Next, find and open the el 79, and reduce it by 95%, and place it on the bottom right, in front of the baskets. Next, find and open the el 82, and leaving the size as is, place it on the top left...D, FH...D and place on the right..D, FH. Next, find and open the el 77, and reduce it by 95%, and place it on the bottom left, against the fence. Next, find and open the el 57, and reduce it by 70%, and place it on the bottom left, behind the bunny and the log.

Next, find and open el 16, and reduce it by 50%, and place it angled on the right side. Next, find and open the el 62, and reduce it by 90%, and place it on the bottom left, in front of the logs. Next, find and open the el 10, and reduce it by 95%, and place it on the bottom right, in front of the nest...D, and place in 2nd nest also.

Lastly, add 3D drop shadows wherever you would like them to be....I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add the copyright information (VERY IMPORTANT)!!

You did it! You now have finished this tag. Finally, add a name in any font and color of your choosing. I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to me at robynebutts@gmail.com, so I can place it on my blog.

Hugs and blessings,

Robyne