Whisper In The Wind Designs : TEMPLATE 14 and CT PTU TUT for Disturbed Scraps

Saturday, April 12, 2014

TEMPLATE 14 and CT PTU TUT for Disturbed Scraps - Sail Away With Me scrap kit!

3:13 PM | Posted by Unknown | Edit Post

Template 14 by me; you can download the temp HERE

Preview of the gorgeous Sail With Me scrap kit by Disturbed Scraps!

Preview of the beautiful Red Sexy tube by Andy Cooper!

CT PTU Tut for the Sail Away With Me scrap kit by Disturbed Scraps, featuring the Red Sexy tube by Andy Cooper!

Materials Needed

The Red Sexy tube by Andy Cooper, which can be purchased at S&CO HERE

The Sail Away With Me scrap kit by Disturbed Scraps, which can be purchased at S&CO HERE

Mask 81 by Wee Scotts Lass, which can be downloaded on her blog HERE

Template #14, made by me...download link is above

PSP - I am using X5, but any should do

***This tutorial assumes you have a working knowledge of PSP***

Okay, let's begin. The first thing you want to do is to create our mask. Open whatever mask you choose to use; I have chosen a mask by WSL. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>700x700 and transparent needs to be checked. I used a paper for the mask; so open paper 7 and copy and paste it to the new image. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens..click on the title of the mask you chose in the drop down menu. Now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) Just copy and paste it to the tag, reduce by 60%, and place wherever you would like it...keep repeating til there is mask everywhere you would like it to be.

***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***

Okay, let's get started! The first thing you will want to do now, is to open up and prepare your template. So, open the template #14 by me, and apply the following papers. Paper 13 on rasters 2 and 9, paper 11 on rasters 3, 7, 8, 10, and 11, and paper 6 on rasters 5, 12, and 13. Next, find and open the full-view of the Red Sexy tube...copy and paste her to the bottom of the tag, reducing her by 10% to fit. Now go back to the tube and copy and paste the close up to the right circle...reduce to fit and invert. Repeat on the left side, except FH.

Next, find and open the el 69, and place at the bottom underneath the tube..D...D and FH, and D again. Next, find and open the el 53, and reduce it by 70%, and place it on the bottom left, behind the tube. Next, find and open the el 91, and reduce it by 60%m and place it centered on the striped rectangle. Next, find and open the el 39, and reduce it by 80%, and place it top center, in the lighter blue square.

Next, find and open the el 40, and reduce it by 85%, and place it on the right side on the close up.Next, find and open the el 14, and reduce it by 40% and place it on the left side. Next, find and open the el 28, and reduce it by 60%, and place it on the bottom right. Next, find and open the el 64, and reduce it by 90%, and place it on the top right.

Next, find and open the el 48, and reduce it by 80%, and place it on the top left, in the circle. Next, find and open the el 36, and reduce it by 95%, and place on the right, on bottom of the close up. Next, find and open the el 32, and reduce it by 70%, and place it centered behind the tube. Next, find and open el 63, and reduce it by 95%, and place it in the center of the bow on the top right.

Next, find and open the el 54, and reduce it by 90%, and place it on the bottom right, to the left of the lighthouse. Next, find and open the el 56, and reduce it by 90%, and place it on the bottom right corner, and FH. Next, find and open the el 55, and reduce it by 85%, and place it on the bottom left. Next, find and open the el 8, and reduce it by 75%, and place it centered, on the striped rectangle.

Next, find and open el 37, and reduce it by 90%, and place it on the bottom right, to the left of the lighthouse. Next, find and open el 25, and reduce it by 95%, and place it on the bottom right, to the left of the rope. Next, find and open el 12, and reduce it by 90%, and place it top center. Next, find and open el 19, and reduce it by 95%, and place it on the bottom right on the rope.

Next, find and open el 26, and reduce it by 98%, and place it on the top and bottom of the white heart. Next, find and open el 94, and reduce it by 85%, and place it on the top right, and make a close up inside it. Next, find and open el 35, and reduce it by 90%, and place it angled on the left of the lighthouse.

Next, find and open el 102, and reduce it by 80%, and place on all red and white striped areas. Next, find and open the el 33, and reduce it by 90%, and place it on the top right, with half of it being hidden. Next, find and open the el 83, and reduce it by 85%, and place it on the top left.

Lastly, add 3D drop shadows wherever you would like them to be....I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add the copyright information (VERY IMPORTANT)!!

You did it! You now have finished this tag. Finally, add a name in any font and color of your choosing. I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to me at robynebutts@gmail.com, so I can place it on my blog.

Hugs and blessings,

Robyne