Showing posts with label Vi Nina. Show all posts
Showing posts with label Vi Nina. Show all posts
Friday, May 16, 2014
Preview of the lovely Brigitta tube by Vi Nina!
Preview of the gorgeous Rose Marie scrap kit by Bibi's Collection!
Preview of Mask #23, by me!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Brigitta tube by Vi Nina, and the Rose Marie scrap kit by Bibi's Collection!
Materials Needed
The Brigitta tube by Vi Nina, which can be purchased at S&CO HERE
The Rose Marie scrap kit by Bibi's Collection, which can be purchased at S&CO HERE
Mask #23, created by me, which can be downloaded HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! Open whatever mask you chose, I chose a mask I created. Now create a new image 800x800, with a transparent back. Now for this mask, I used a paper instead of flood-filling; so open paper 5, and copy and paste it to the new image. Now, go to the top layers menu and click NEW MASK LAYER>FROM IMAGE..a pop up opens...click on the title of the mask you chose in the drop-down menu. Merge visible layers, then copy and paste it to the tag. Re-size and move as needed...for this one, I left the size as is.
Now, open el 84, leaving the size as is, and place all over the bottom 1/3 of the tag.
Open the tube, reduce by 35%, and center on the bottom of tag. Copy and paste again to the top right, of the tag...reduce to fit, erasing extra..invert..add overlay blend mode...D.
Open el 80, reduce 65%, place on the bottom left, on the sand.
Open el 60, reduce by 40%, place on bottom right, on sand.
Open el 57, reduce by 35%, place on left side, behind the sand..FH.
Open el 76, reduce 65%, place bottom right, by chair.
Open el 10, reduce 30%, place bottom left, front of tree.
Open el 61, reduce 35%, place bottom right by umbrella.
Open el 58, invert on bottom of mask layer...FV.
Open el 71, reduce 80%, place bottom right by chair.
Open el 101, reduce 60%, place left side, behind tree.
Open el 105, reduce 80%, place bottom right corner.
Open el 108, reduce 80%, place left, by the grass and tree.
Open el 75, reduce 80%, place bottom right on chair.
Open el 12, reduce by 80%, place bottom left by tree.
Open el 20, reduce 85%, place left side on boat.
Open el 73, reduce 85%, place bottom left, by towel.
Open el 82, reduce 90%, place bottom left, on towel.
Open el 46, leaving size as is, place on top left on mask layer..D and FH and move to the right and down.
Open el 74, reduce by 85%, place bottom left, by towel.
Open el 91, reduce 60%, place bottom right, by chair, behind tube.
Open el 111, reduce 85%, place bottom left..D and FH, place bottom right.
Open el 95, reduce 88%, place bottom right, behind chair.
Open el 38, reduce by 70%, place bottom left, on towel.
Open el 25, reduce by 20%, place on right on water...D and DH and move to the right.
Open el 52, leaving the size as is, place top left...D and FH.
Open el 109, reduce 80%, place left bottom by boat.
Open el 90, reduce 90%, place bottom right, front of the lantern..D and FH.
Open el 11, reduce 70%, place bottom left, behind the sun cream.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Sunday, May 4, 2014
Preview of the sexy Dempsey tube by Vi Nina!
Preview of the awesome Dempsey kit match by Designs by Joan!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Dempsey tube by Vi Nina, and the Dempsey kit match by Designs by Joan!
Materials Needed
The Dempsey tube by Vi Nina, which can be purchased at S&CO HERE
The Dempsey scrap kit by Designs by Joan, which can also be purchased at S&CO HERE
Mask 44 by Millie's PSP Madness, which can be downloaded on her blog HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! Open whatever mask you chose, I chose a mask by MPM. Now create a new image 800x800, with a transparent back. Now for this mask, I used a paper instead of flood-filling; so open paper 8, and copy and paste it to the new image. Now, go to the top layers menu and click NEW MASK LAYER>FROM IMAGE..a pop up opens...click on the title of the mask you chose in the drop-down menu. Merge visible layers, then copy and paste it to the tag. Re-size and move as needed...for this one I increased the size by 10%, then centered it.
Open el 25 the frame, increase by 40%, center.
Open close up view of the tube, reduce 15%, center on frame.
Open el 4, increase size to fit under frame. .
Open el 72, reduce 70%, place bottom right.
Open el 38, reduce 75%, place bottom right, right side of the bag.
Open el 60, reduce 80%, FH, place bottom right, over bag and champagne.
Open el 77, reduce 30%, place bottom center of frame.
Open el 76, reduce 90%, place bottom right, front of bag.
Open el 75, reduce 95%, place bottom right, on left of champagne.
Open el 8, reduce 85%, place on balls..D, place top right.
Open els 40, 61, 74, and 50, reduce 90%, place sporadically on frame.
Open el 14, reduce 80%, place bottom center, on el 8.
Open el 12, reduce 75%, place angled top left.
Open el 74, reduce 90%, place top left, center of bow.
Open el 73, reduce 85%, place on bottom left, and top right of flowers...D each 3 times to make darker.
Open el 1, reduce 90%, place bottom left and top right on flowers...D each 3 times to make darker.
Open el 57, reduce 90%, place angled top of champagne.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Wednesday, April 23, 2014
Saturday, April 19, 2014
Preview of the stunning Marlene tube by Vi Nina!
Preview of the gorgeous Marlene scrap kit by Devilish Dezines!
CT PTU Tut for the Marlene tube by Vi Nina, and the Marlene kit match by Devilish Dezines!
Materials Needed
The Marlene tube by Vi Nina, which can be purchased at S&CO HERE
The Marlene scrap kit match by Devilish Dezines, which can be purchased at S&CO HERE
Mask 41 by Wee Scotts Lass, which can be downloaded on her blog HERE
PSP - I am using X5, but any should do
***This tutorial assumes you have a working knowledge of PSP***
Okay, let's begin. The first thing you want to do is to create our mask. Open whatever mask you choose to use; I have chosen a mask by WSL. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>700x700 and transparent needs to be checked. I have chosen to use a paper for this mask...so open paper 4, and copy and paste it to the new image. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens..click on the title of the mask you chose in the drop down menu. Now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) Just copy and paste it to the tag, and center it.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
Okay, let's get started! Find and open the frame #3, and reduce it by 10%, and center it on the tag. Next, place paper 4 behind the frame. Next, find and open the Marlene tube, reduce it by 30%, and place it towards the left side of the frame...erase any extra that is on the frame itself.
Next, find and open the el 26, and reduce it by 35%m and place it on the bottom centered...D and FH. Next, find and open the el 13, and reduce it by 30%, and place it on the left side. Next, find and open the el 16, and reduce it by 40%, and place it on the right side. Next, find and open the el 14, and reduce it by 20%, and place it on top of el 26.
Next, find and open the el 38, and reduce it by 85%, and place it on the left side..erase what shadows are sticking out..D and FH and place it on the right side...D and FH both sides. Next, find and open the el 23, and reduce it by 70%, and place it on the center bottom of the tube, erase the sides. Next, find and open the el 4, and reduce it by 20%, and place it on the tube layer...erase any on her face and neck.
Next, find and open el 1, and reduce it by 90%, and place it on the bottom left of the frame...D and FH and place it on the bottom right. Next, find and open el 21, and reduce it by 90%, and place it on the bottom left of the frame...D and FH and place it on the bottom right. Next, find and open el 31, and reduce it by 85%, and place it on the right side fence post. Next, find and open el 38, and reduce it by 85%, and place it on the bottom left...D and FH, and place on the bottom right.
Next, find and open the el 47, and reduce it by 80%, and place it on the right side. Next, find and open the el 5, and reduce it by 75%..FV and place it on the right side, on el 47. Next, find and open the el 41, and reduce it by 30%, and place it on the left side, above the other flowers and FH. Next, find and open el 36, and reduce it by 90%, and place it on the right, on top of el 47...D and reduce 5% more, and place a little lower than the first one.
Next, find and open the el 21, and reduce it by 98%, and place under the 2 el 36 flowers. Next, find and open the el 49, and reduce it by 35%, and place on the mask layer. Next, find and open the el 4, and reduce it by 60%, and place it on the right side, on top of el 49...D and FH, and place it on the left side.
Next, find and open the el 6, and reduce it by 65%, and place it on the left side. Next, find and open el 17, and reduce it by 80%, and place it centered at the bottom. Next, find and open el 35, and reduce it by 90%, and place centered at the bottom on top of el 17. Next, find and open the el 36, and reduce it by 90%, and place them sporadically on the other flowers. Then choose a font of your liking, and add word art!
Lastly, add 3D drop shadows wherever you would like them to be....I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add the copyright information (VERY IMPORTANT)!!
You did it! You now have finished this tag. Finally, add a name in any font and color of your choosing. I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to me at robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Saturday, March 29, 2014
Template can be found at Addictive Templates HERE
Mask can be found at Creative Misfits HERE
Preview of the awesome Vroom scrap kit by Bibi's Collection, which can be purchased at Scraps N Company HERE
Preview of the gorgeous Molly Racer tube by Vi Nina, which can be purchased at Scraps N Company HERE
Tuesday, March 25, 2014
Subscribe to:
Posts
(Atom)
Licensed Reseller
Beautiful Blog Award
Designer That Inspires Award
Blog I Love Award
Rawk My Socks Award
CU License Tagging Obsessions
Niqui Designs CU License
CU License Scraps Dimensions
DzinesByMelz CU License
Anorie's CU License
CU License Lacarolita's Designz
CU License Tezza'a Dezignz
CU License Scrap and Tubes
Cakie Pot Pie CU License
Denise Creationz CU License
EW CU License
FDM CU License
More shops I CT for & Love
"
