Showing posts with label P-O Concept. Show all posts
Showing posts with label P-O Concept. Show all posts
Friday, May 23, 2014
Preview of the stunning Vintag'Esk Dreamin kit by P-O Concept!
Preview of the gorgeous Precious tube by The Hunter!
Preview of Mask #135 by me!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Vintage'Esk Dreamin scrap kit by P-O Concept, featuring the Precious tube by The Hunter!
Materials Needed
The Vintage'Esk Dreamin kit by P-O Concept, which you get FREE with any $5 S&CO shop purchase HERE
The Precious tube by The Hunter, which you can purchase at S&CO HERE
Mask #135, by me, which you can download HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! For this tag, I used a mask that I created, mask #135. Okay, open the mask...then, create a new image 800x800, with a transparent back. For this mask I used paper #12...copy and paste it to the new image. Go to top and click LAYERS>NEW MASK LAYER>FROM IMAGE...choose mask...then merge group. I increased this mask by 10%, and centered it on the tag.
Open el 45, increase by 10%, place on bottom left.
Open el 38, reduce 10%, place bottom left in front of bridge corner.
Open the tube, reduce 40%, place bottom right, in front of bridge.
Open el 103, leaving the size as is, place top right, angled behind the tube.
Open el 11, reduce 60%, place left, on the bridge.
Open el 82, reduce 70%, place top on the mask, to the left of and behind the umbrella.
Open el 20, reduce 80%, place bottom left, against the bridge, behind the flowers.
Open el 25, reduce 15%, place on the right side, on the mask layer.
Open el 59, reduce 75%, place top left. side.
Open el 6, reduce 25%, place bottom left, in front of bridge...D and reduce 25% more and move to the right and down from the previous one...D again..FH and place on the left of the first one.
Open el 61, reduce 80%, place bottom right.
Open el 81, reduce 75%, place bottom in front of the tube, on el 61.
Open el 113, reduce 35%, place top left.
Open el 72, reduce 95%, place top right, under umbrella.
Open el 84, reduce 95%, place top right on the umbrella handle.
Open el 107, reduce 80%, place bottom left.
Open el 19, reduce 80%, place behind the bridge layer.
Open el 24, reduce 70%, place bottom center, in front of tube.
Open el 5, increase 10%, place horizontal under tube.
Open el 11, reduce 90%, place bottom left.
Open el 16, reduce 40%, place angled top center, behind the cat.
Open el 119, leaving size as is, place top left on the mask...D and FH and place top right.
Open el 115, reduce to fit on top of el 5.
Open el 56, leaving the size as is, place behind the bridge on mask layer...keep duplicating and flipping and place around on mask layer, where you like.
Open el 64, reduce 90%, place on the bottom left, behind the other flower.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Wednesday, May 21, 2014
Preview of the Sexy Meow tube by Pandora Creations!
Preview of the awesome S&CO Cat Lover's Collab!
Preview of Mask #86, by me!
CT PTU TUT for the Meow tube by Pandora Creations and the S&CO Cat Lover's Collab!
Materials Needed
The Meow tube by Pandora Creations, which you get FREE with any $5 S&CO shop purchase HERE
The S&CO May Cat Lover's Collab, which you get FREE with any $10 S&CO shop purchase HERE
Mask #86, by me, which you can download HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! For this tag, I used a mask that I created, mask #86. Okay, open the mask...then, create a new image 800x800, with a transparent back. For this mask I used paper #10 by P-O Concept...copy and paste it to the new image. Go to top and click LAYERS>NEW MASK LAYER>FROM IMAGE...choose mask...then merge group. I increased this mask by 10%, and centered it on the tag.
Open el 35 by Bibi's Collection, leaving the size as is, place it on the bottom right..D and FH and place bottom left...D both and move back from the others.
Open the Meow tube with the following layers: hair 1, raster 8 ears, raster 9 bracelet, rasters 11, 15, and 18 leg covers, raster 23 suit, raster 33 suit, raster 35 necklace, raster 36 cat eyes, raster 37 girl, raster 40 tail, and rasters 4-43. Copy and paste to the bottom of the tag, reducing by 25%.
Open el 17 by P-O Concept, reducing by 40%, place it on the bottom left, behind the walkway.
Open el 32, by P-O Concept, leaving the size as is, place on the right, behind the walkway layer.
Open el 1 by Bibi's Collection, leaving the size as is, place on the bottom right, in front of the tube.
Open el 7 by Bibi's Collection, reducing by 40%, place it on the left side, on mask layer.
Open el 39 by P-O Concept, reducing by 60%, place bottom left, front of the tube.
Open el 55 by P-O concept, reducing by 70%, place bottom left, front of the plant.
Open el 18 by Bibi's Collection, leaving the size as is, place on the left top, on the mask layer, halfway hidden behind the tube.
Open el 33 by P-O Concept, reduce by 30%, and place on the right side.
Open el 16 by Bibi's Collection, reducing 80%, place on the bottom left, angled on the books.
Open el 16 by P-O Concept, reducing by 60%, place on the top left, behind the plant.
Open el 25 by Ginnibug Designz, reduce 90%, place bottom right, in front of cat.
Open el 37 by Ginnibug Designz, reducing 85%, place bottom left, on books.
Open el 29 by Ginnibug Designz, reduce 70%, place bottom around on the open walkway areas.
Open el 44 by P-O Concept, reducing by 90%, place bottom right, front of cat.
Open el 47 by P-O Concept, reduce 70%, place in the top left corner.
Open the MEOW word art by Tweets, leaving the size as is, place on the tube layer.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Monday, April 28, 2014
Preview of the gorgeous Pirate scrap kit by P-O Concept!
Preview of the awesome Pirate tube by Danny Lee!
CT PTU Tut for the Pirate scrap kit by P-O Concept, and the Pirate tube by Danny Lee!
Materials Needed
The Pirate scrap kit by P-O Concept, which can be purchased at S&CO HERE
The Pirate tube by Danny Lee, which can be purchased at S&CO HERE
Mask - 250 by Wee Scotts Lass, which can be downloaded on the blog HERE
PSP - I am using X5, but any should do
***This tutorial assumes you have a working knowledge of PSP***
Okay, let's begin. Let's create our mask. Open whatever mask you choose to use; I have chosen a mask by WSL. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>700x700 and transparent needs to be checked. I chose to use a paper for the mask, so copy and paste paper 10 to the new image. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens...click on the title of the mask you chose in the drop down menu. Now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) Just copy and paste it to the tag, centering it.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
Next, find and open el 75, and leaving the size as is, place it on the bottom right of the mask...D and FH and place on the bottom left...D both sides and move down. Next, find and open the el 12, and leaving the size as is, place it on the right side...FH...D and FH and place on the left side. Next, find and open the full-view capa 2 of the tube, reduce her by 35% and center her on the sand. Go back to the tube and copy and paste the close up to the top left of the mask layer...reduce to fit, erasing any overhang...invert and add a screen blend mode.
Next, find and open the el 77, and reduce it by 20%..FH and place it on the bottom right. Next, find and open the el 27, and reduce it by 35%, and place it in the water on the left side. Next, find and open the el 7, and reduce it by 40%...FH and place it on the left side, in the sand. Next, find and open the el 94, and reduce it by 65%, and place it on the left side, on the log posts.
Next, find and open the el 1, and reduce it by 40%, and place it in the sand, on the bottom right. Next, find and open the el 26, and reduce it by 30%, and place it on the bottom right, in front of the barrel. Next, find and open the 71, and reduce it by 40%, and place it on the bottom right, behind the chest. Next, find and open the el 57, and reduce it by 85%, FH, and place it on the bottom left, in front of the log posts.
Next, find and open the el 16, and reduce it by 75%, and place it on the right side, on top of the barrel. Next, find and open the el 74, and reduce it by 85%, and place in the sand, on the left side. Next, find and open the el 21, and leaving the size as is, and place it on the top right, 1/2 hidden behind the tree. Next, find and open el 76, and reduce it by 85%, and place it on the bottom left, behind the chain and anchor.
Next, find and open the el 92, and reduce it by 80%, and place it on the bottom right, under the trunk. Next, find and open the el 67, and reduce to fit on the barrel. Next, find and open the el 41, and place it half hidden behind the sand. Next, find and open the el 3, and reduce it by 85%..FH, and place in front of the barrel.
Next, find and open el 54, and reduce it by 95%, and place it on the bottom right. Next, find and open el 44, and reduce it by 85%, and place on the left side, on the grass that is in front of the log posts. Next, find and open el 42, and reduce it by 90%, and place it on the bottom left..FH..D and FH and reduce another 5% and place on the bottom right. Next, find and open el 72, and reduce it by 90%, and place on the net, on the bottom left.
Lastly, add 3D drop shadows wherever you would like them to be....I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add the copyright information (VERY IMPORTANT)!!
You did it! You now have finished this tag. Finally, add a name in any font and color of your choosing. I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to me at robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Friday, April 18, 2014
You can download this template #20 by me HERE
Preview of the gorgeous Smile kit match by P-O Concept!
Preview of the lovely Smile tube by Andy Cooper!
CT PTU Tut for the Smile scrap kit by P-O Concept, featuring the Smile tube by Andy Cooper!
Materials Needed
The Smile scrap kit match by P-O Concept, which can be purchased at S&CO HERE
The Smile tube by Andy Cooper, which can be purchased at S&CO HERE
Template # 20 made by me, which you can download above
Mask - 81 by Wee Scotts Lass, which can be downloaded on her blog HERE
PSP - I am using X5, but any should do
***This tutorial assumes you have a working knowledge of PSP***
Okay, let's begin. The first thing you want to do is open the template #13 that was made by me. Then, let's create our mask. Open whatever mask you choose to use; I have chosen a mask by WSL. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>700x700 and transparent needs to be checked. I chose to use a paper for the mask, so copy and paste paper 4 to the new image. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens...click on the title of the mask you chose in the drop down menu. Now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) Just copy and paste it to the tag, reduce the size by 50%, and place on the top left...duplicate and move down...keep duplicating and moving around until all areas you wish to have a mask in are covered.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
The next thing we want to do is to start adding our elements to make this tag come to life!! First, we need to put our papers to our template. The papers should be as follows: paper 6 on rasters 3, 4, and 11, paper 10 on rasters 2, 7, and 8, paper 7 on rasters 6, p, and C9, and paper 1 on rasters 5 and 10.
Next, find and open the full-view of the Smile tube. Copy and paste her to the tag; reduce her by 25% and center her at the bottom. Now go back and open the close up view....copy and paste it to the left bottom square..reduce to fit and invert...repeat for the other square but FH. Now add an inner bevel to all shapes.
Next, find and open the el 54, and reduce it by 80%, and place it on the bottom right. Next, find and open the el 50, and reduce it by 80%, and place it on the bottom right, behind the makeup. Next, find and open the el 39, and reduce it to fit over the edges of the red circle. Next, find and open the el 9, and reduce it by 80%, and place it on the right square.
Next, find and open the el 78, and reduce it by 20%, and FV and place it on the right strip. Next, find and open the el 44, and reduce it by 90%, and place it on the top right, on the strip. Next, find and open the el 43, and reduce it by 40%, and place it on the bottom left, under the close ups. Next, find and open the el 57, and reduce it by 85%, and place it in the bottom left corner.
Next, find and open the el 1, and leaving the size as is, place it on the white square. Next, find and open the el 34, and leaving the size as is, and place it sporadically all over the mask layer...flip it as needed. Next, find and open the el 5, and reduce it by 45%, and place it on the top left. Next, find and open the el 72, and reduce it by 85%, and place it on the left corner of the white square.
Next, find and open the el 75, and reduce it by 85%, and place it on the right side, by the smile signs. Next, find and open the el 58, and leaving the size as is, place it on the top left, on the black oval..FH and FV and place at the top. Next, find and open the el 79, and reduce it by 70%, and place it angled on the top right. Next, find and open the el 81 and reduce it by 25%, and place it in the red circle.
Next, find and open el 35, and reduce it by 85%, and place it centered and angled on the white ball in the red circle. Next, find and open el 45, and reduce it by 20%, and place it on the top left. Next, find and open el 47, and reduce it by 40%, and place it angled behind the tube. Next, find and open el 83, and reduce it by 85%, and place it on the top left.
Lastly, add 3D drop shadows wherever you would like them to be....I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add the copyright information (VERY IMPORTANT)!!
You did it! You now have finished this tag. Finally, add a name in any font and color of your choosing. I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to me at robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Saturday, April 12, 2014
You can download my template # 13 HERE
Preview of the stunning Lady with Owls tube by Alfadesire!
Preview of the awesome Hoot Hoot scrap kit by P-O Concept!
CT PTU Tut for the Lady with Owls tube by Alfadesire, and the Hoot Hoot scrap kit by P-O Concept!
Materials Needed
The Lady with Owls tube by Alfadesire, which can be purchased at PFD HERE
The Hoot Hoot scrap kit by P-O Concept, which can be purchased at PFD HERE
Template # 13 made by me, which you can download above
Mask - 152 by Wee Scotts Lass, which can be downloaded on her blog HERE
PSP - I am using X5, but any should do
***This tutorial assumes you have a working knowledge of PSP***
Okay, let's begin. The first thing you want to do is open the template #13 that was made by me. Then, let's create our mask. Open whatever mask you choose to use; I have chosen a mask by WSL. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>700x700 and transparent needs to be checked. I chose to use a paper for the mask, so copy and paste paper 7 to the new image. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens...click on the title of the mask you chose in the drop down menu. Now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) Just copy and paste it to the tag, reduce the size by 50%, and place on the top left...duplicate and move down...keep duplicating and moving around until all areas you wish to have a mask in are covered.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
The next thing we want to do is to start adding our elements to make this tag come to life!! First, we need to put our papers to our template. The papers should be as follows: paper 14 on all dark grey shapes, paper 7 on all blue shapes, and paper 6 on all cream shapes.
Next, find and open the full-view of the Lady with owls (layers-with owls, with feathers on clothes, blue eyes, no flowers in hair, regular earrings). Copy and paste her to the tag; reduce her by 30% and center her at the bottom. Now go back and have her with no feathers or owls for the close up. Copy and paste to the right bottom circle...reduce to fit and invert..then add a canvas simple texture. Copy and paste again to the left bottom circle...FH, reduce to fit and invert...then add a canvas fine texture.
Next, find and open the el 4, and reduce it by 65%, and place it on the bottom left. Next, find and open the el 28, and reduce it by 80%, and place it in the bottom right corner. Next, find and open the el 72, and reduce it by 70%, and place it on the bottom right, behind the tube and el 28. Next, find and open the el 91, and reduce it by 90%, and place it on the bottom right, to the left of the lantern.
Next, find and open the el 70, and reduce it by 70%, and place it on the top right. Next, find and open the el 78, and reduce it by 80%, and place it on the bottom left, behind the shelves...duplicate and move up...erase any overlapping. Next, find and open the el 11, and reduce it by 90%, and place it on the bottom right...D and FH and place on the bottom left.
Next, find and open the el 12, and reduce it by 90%, and place it on the bottom left. Next, find and open the el 86, and reduce it by 80%, and place it on the left side. Next, find and open the el 102, and reduce it by 90%, and place it in the top right corner. Next, find and open the el 41, and reduce it by 95%, and place it centered on el 102, the bow.
Next, find and open the el 71, and reduce it by 90%, and place it on the bottom right, at the bottom of the bird house. Next, find and open the el 39, and reduce it by 75%, and place it on the top left, in the circle. Next, find and open the el 26, and reduce it by 90%, and place it in the top left, in the center of the el 39 flower. Next, find and open the el 106, and reduce it by 20%, across the top.
Lastly, add 3D drop shadows wherever you would like them to be....I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add the copyright information (VERY IMPORTANT)!!
You did it! You now have finished this tag. Finally, add a name in any font and color of your choosing. I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to me at robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Subscribe to:
Posts
(Atom)
Licensed Reseller
Beautiful Blog Award
Designer That Inspires Award
Blog I Love Award
Rawk My Socks Award
CU License Tagging Obsessions
Niqui Designs CU License
CU License Scraps Dimensions
DzinesByMelz CU License
Anorie's CU License
CU License Lacarolita's Designz
CU License Tezza'a Dezignz
CU License Scrap and Tubes
Cakie Pot Pie CU License
Denise Creationz CU License
EW CU License
FDM CU License
More shops I CT for & Love
"
