Showing posts with label Andy Cooper. Show all posts
Showing posts with label Andy Cooper. Show all posts
Monday, May 26, 2014
Preview of the sexy Afro Rocker tube by Andy Cooper!
Preview of the gorgeous Afro Rocker scrap kit by Designs By Joan!
Preview of Mask #191 by me!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the sexy Afro Rocker tube by Andy Cooper, and the gorgeous Afro Rocker kit match by Designs By Joan!
Materials Needed
The Afro Rocker tube by Andy Cooper, which you can purchase at S&CO HERE
The Afro Rocker kit match by Designs By Joan, which you can purchase at S&CO HERE
Mask #191, by me, which you can download HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! For this tag, I used a mask that I created, mask #191. Okay, open the mask...then, create a new image 800x800, with a transparent back. For this mask I used paper #4...copy and paste it to the new image. Go to top and click LAYERS>NEW MASK LAYER>FROM IMAGE...choose mask...then merge group. I increased this mask by 15%, and centered it on the tag.
Open el 25, increase size by 20%, center at bottom of tag.
Open the full-view of the tube, reduce 20%, center on tag.
Open el 8, reduce 45%, place on left, behind tube.
Open el 4, reduce 60%, place on left, in front of table.
Open el 43, reduce 40%, place on right, behind the tube.
Open el 16, reduce 60%, place on right, in front of jukebox.
Open el 3, reduce 70%, place top left.
Open el 10, reduce 80%, place on left, on the table.
Open el 15, reduce 90%, place on table.
Open el 12, reduce 90%, place on table.
Open el 18, reduce 90%, place on table.
Open el 13, reduce 85%, place on table, behind the food.
Open el 37, reduce 65%, place bottom left, front of stool.
Open el 14, reduce 50%, place bottom right, front of jukebox and speaker.
Open el 50, reduce 10%, place behind the tube's head.
Open el 44, reduce 70%, place top right...D and FH and move down a bit.
Open el 96, leaving the size as is, place on mask layer...D..D again and FH..D again.
Open el 59, reduce 80%, place bottom right, by keyboard leg.
Open el 73, reduce 80%, place bottom left, in front of purse.
Open el 56, reduce 90%, place front of purse.
Open el 36, reduce 95%, place on table...FH.
Open el 39, reduce 90%, place on table.
Open el 23, reduce 35%, place angled on the right, in front of speaker.
Open el 46, reduce 90%, place on guitar handle.
Open el 85, reduce 40%, place bottom right.
Open el 74, reduce 90%, place left in front of the purse..FH.
Open el 94, reduce 30%, place on the right, on top of the speaker.
Open el 80, reduce 90%, place on left in front of purse.
Open el 93, leaving the size as is, place top right on mask layer...D and FH and place on the left.
Open el 41, leaving the size as is, place on the floor..D and FH.
Open el 57, leaving the size as is, place in front of the jukebox..D and FH and move down and to the left.
Open el 91, reduce 50%, place in front of the table and food...D and FH and place in front of the speaker.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Thursday, May 22, 2014
Tuesday, May 20, 2014
Monday, May 19, 2014
Preview of the awesome Neon tube by Andy Cooper!
Preview of the beautiful Neon scrap kit by Designz By Sue!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Neon tube by Andy Cooper, and the Neon scrap kit by Designz By Sue!
Materials Needed
The Neon tube by Andy Cooper, which can be purchased at S&CO HERE
The Neon scrap kit by Designz By Sue, which can be purchased at S&CO HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! For this tag, I used a mask that is provided in the kit. Now create a new image 800x800, with a transparent back. Next, open el 58, leaving the size as is, and center it on the new image.
Open el 43, leaving the size as is, place centered at the bottom.
Open the aqua full-view tube, reduce 35%, place on right side of the tag.
Open the yellow full-view tube, reduce 35%, FH and place on left side of the tag.
Open el 38, reduce 40%, place top center, on the mask layer.
Open el 21, reduce 50%, place top left corner...D and FH and place top right corner.
Open el 22, leaving the size as is, place top right corner, D and FH and place top left corner.
Open el 32, reduce 55%, place bottom left, behind speakers..D and FH and place on the right.
Open el 4, reduce 80%, place bottom right corner.
Open el 5, reduce 80%...FH and place bottom left corner.
Open el 44, leaving the size as is, place top center behind the music notes, erase bottom of string.
Open el 42, reduce 85%, place bottom left, in front of speakers.
Open el 16, reduce 85%, place bottom right, in front of speakers.
Open el 17, reduce 35%, place centered on top of balloon string.
Open el 20, reduce 65%, place centered at the bottom.
Open el 28, leaving the size as is, place on the right, behind the tube on the mask layer...D and FH and place on the left.
Open el 41, reduce 80%, place bottom left on top of and behind the speaker layer...D and FH and place on the right.
Open el 6, reduce 85%, place centered on the lollipop stick.
Open el 13, reduce 65%, place on the right side, angled by the tube.
Open el 26, reduce 65%, place on the left side, angled by the tube.
Open el 30, leaving the size as is, place on the top left corner....D and FH and place on the top right corner.
Open el 47, reduce 35%, place on the bottom left, on mask layer...D and FH and place on the right.
Open el 11, reduce 60%, place across the top, centered under the balloon.
Open el 7, reduce 75%, place angled on the bottom right, on the candy..D and FH and place on the left.
Open el 57, reduce 75%, place on the top right under the tube layer...D and FH and place top left...D and FV and place bottom left...D and FH and place bottom right.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Saturday, May 10, 2014
Preview of the awesome Zombie Blood tube by Andy Cooper!
Preview of the wicked Zombie Blood kit match by DNScraps!
Preview of mask #23, created by me!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Zombie Blood tube by Andy Cooper, and the Zombie Blood kit match by DNScraps!
Materials Needed
The Zombie Blood tube by Andy Cooper, which can be purchased at S&CO HERE
The Zombie Blood kit match by DNScraps, which can also be purchased at S&CO HERE
Mask #23, created by me, which can be downloaded HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! Open whatever mask you chose, I chose a mask I created. Now create a new image 800x800, with a transparent back. Now for this mask, I used a paper instead of flood-filling; so open paper 6, and copy and paste it to the new image. Now, go to the top layers menu and click NEW MASK LAYER>FROM IMAGE..a pop up opens...click on the title of the mask you chose in the drop-down menu. Merge visible layers, then copy and paste it to the tag. Re-size and move as needed...for this one I increased the size by 15%, then centered it.
Open the dark door, reduce by 25%, and place on tag towards the left.
Open the box, reduce 40%, place on right bottom.
Open the full-view of the tube, reduce her by 30%, place in front of gate.
Open the close-up of the tube...place on top left of the mask...FH, reduce to fit...invert and add screen blend mode.
Open the spiderweb, reduce 35%, place top right of tube.
Open the cup blood, reduce 50%, place bottom left, in front of gate post.
Open the dark bear, reduce 40%, place bottom right, behind box.
Open the ghost, reduce 60%, place top right.
Open the word art, reduce 80%, and place on box.
Open the lamp, reduce 50%, place bottom right, front of the box.
Open the knife, reduce 45%, place bottom right behind lamp.
Open butcher knife, reduce 80%, place on the left post of fence.
Open the food ration, reduce 80%, place bottom right, in front of box.
Open the black cat, reduce 80%..FH and place bottom left.
Open the bloomer, reduce 90%, place top right.
Open the pipe, reduce 70%, place bottom right, in front of box.
Open the noms, reduce 90%, place bottom right, on box, front of the lamp.
Open the brad cupcake, reduce 90%, place bottom right, on top of food ration.
Open the hallo, leaving size as is, place on left side of mask..D..D and FH, reduce 70%, place on right side by monster's arm...D.
Open the fork in eye ball, reduce 80%, place bottom right, against the box.
Open the gun, reduce 45%, place right side, on top of box.
Open the candle skull, reduce 85%, place on top of box, front of gun. e
Open the virus, reduce 85%, place bottom right, front of box.
Open the eye dark, reduce 90%, place on left by cat.
Open the blade heart, reduce 90%, place bottom right, above the virus.
Open the stars, leaving size as is, place sporadically on mask layers...D and FH to suit your liking.
Open the bank, reduce 60%, place on bottom left, front of gate.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Subscribe to:
Posts
(Atom)
Licensed Reseller
Beautiful Blog Award
Designer That Inspires Award
Blog I Love Award
Rawk My Socks Award
CU License Tagging Obsessions
Niqui Designs CU License
CU License Scraps Dimensions
DzinesByMelz CU License
Anorie's CU License
CU License Lacarolita's Designz
CU License Tezza'a Dezignz
CU License Scrap and Tubes
Cakie Pot Pie CU License
Denise Creationz CU License
EW CU License
FDM CU License
More shops I CT for & Love
"
