Showing posts with label Designs by Joan. Show all posts
Showing posts with label Designs by Joan. Show all posts
Monday, May 26, 2014
Preview of the sexy Afro Rocker tube by Andy Cooper!
Preview of the gorgeous Afro Rocker scrap kit by Designs By Joan!
Preview of Mask #191 by me!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the sexy Afro Rocker tube by Andy Cooper, and the gorgeous Afro Rocker kit match by Designs By Joan!
Materials Needed
The Afro Rocker tube by Andy Cooper, which you can purchase at S&CO HERE
The Afro Rocker kit match by Designs By Joan, which you can purchase at S&CO HERE
Mask #191, by me, which you can download HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! For this tag, I used a mask that I created, mask #191. Okay, open the mask...then, create a new image 800x800, with a transparent back. For this mask I used paper #4...copy and paste it to the new image. Go to top and click LAYERS>NEW MASK LAYER>FROM IMAGE...choose mask...then merge group. I increased this mask by 15%, and centered it on the tag.
Open el 25, increase size by 20%, center at bottom of tag.
Open the full-view of the tube, reduce 20%, center on tag.
Open el 8, reduce 45%, place on left, behind tube.
Open el 4, reduce 60%, place on left, in front of table.
Open el 43, reduce 40%, place on right, behind the tube.
Open el 16, reduce 60%, place on right, in front of jukebox.
Open el 3, reduce 70%, place top left.
Open el 10, reduce 80%, place on left, on the table.
Open el 15, reduce 90%, place on table.
Open el 12, reduce 90%, place on table.
Open el 18, reduce 90%, place on table.
Open el 13, reduce 85%, place on table, behind the food.
Open el 37, reduce 65%, place bottom left, front of stool.
Open el 14, reduce 50%, place bottom right, front of jukebox and speaker.
Open el 50, reduce 10%, place behind the tube's head.
Open el 44, reduce 70%, place top right...D and FH and move down a bit.
Open el 96, leaving the size as is, place on mask layer...D..D again and FH..D again.
Open el 59, reduce 80%, place bottom right, by keyboard leg.
Open el 73, reduce 80%, place bottom left, in front of purse.
Open el 56, reduce 90%, place front of purse.
Open el 36, reduce 95%, place on table...FH.
Open el 39, reduce 90%, place on table.
Open el 23, reduce 35%, place angled on the right, in front of speaker.
Open el 46, reduce 90%, place on guitar handle.
Open el 85, reduce 40%, place bottom right.
Open el 74, reduce 90%, place left in front of the purse..FH.
Open el 94, reduce 30%, place on the right, on top of the speaker.
Open el 80, reduce 90%, place on left in front of purse.
Open el 93, leaving the size as is, place top right on mask layer...D and FH and place on the left.
Open el 41, leaving the size as is, place on the floor..D and FH.
Open el 57, leaving the size as is, place in front of the jukebox..D and FH and move down and to the left.
Open el 91, reduce 50%, place in front of the table and food...D and FH and place in front of the speaker.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Saturday, May 24, 2014
Preview of the sexy Beware tube by The Hunter!
Preview of the awesome Beware kit match by Designs By Joan!
Preview of Mask #173 by me!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Beware tube by The Hunter, and the Beware kit match by Designs By Joan!
Materials Needed
The Beware tube by The Hunter, which you can purchase at S&CO HERE
The Beware scrap kit by Designs By Joan, which you can purchase at S&CO HERE
Mask #173, by me, which you can download HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! For this tag, I used a mask that I created, mask #173. Okay, open the mask...then, create a new image 800x800, with a transparent back. For this mask I used paper #3...copy and paste it to the new image. Go to top and click LAYERS>NEW MASK LAYER>FROM IMAGE...choose mask...then merge group. I increased this mask by 10%, and centered it on the tag.
Open the full-view of the tube, reduce 15%, center, but slightly to the left.
Open el 18, reduce by 45%, place top right.
Open the close-up of the tube, place behind the window, reduce to fit...add screen blend mode.
Open el 33, reduce by 30%, place bottom left, behind the tube.
Open el 35, reduce by 60%, place on the left, behind the car.
Open el 15, reduce 15%, place on the bottom right corner, behind the dog.
Open el 76, reduce 40%, place bottom right on mask layer...D, FH and place on the left.
Open el 68, reduce 65%, place top left, over mask.
Open el 81, reduce 80%, place angled on the left, above the buildings.
Open el 75, reduce 30%, place top left.
Open el 6, reduce 40%, place bottom right, in front of window.
Open el 90, reduce by 80%, place top left.
Open el 62, reduce 40%, place center left on mask..FH.
Open el 61, reduce 80%, place bottom left in front of car.
Open el 73, reduce 90%, place top left on mask layer.
Open el 72, reduce 90%, place angled bottom of window.
Open el 42, reduce 40%, place bottom right corner.
Open el 16, reduce 90%, place bottom left, on car.
Open el 20, reduce 80%, place bottom right...FV..D and FH and place bottom left.
Open el 83, reduce by 60%, place on right, in front of window.
Open el 53, reduce 80%, place bottom left, by the bomb.
Open el 39, reduce 90%, place bottom right.
Open el 86, leaving the size as is, place top left on mask.
Open el 82, leaving the size as is, place top right, over window.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Wednesday, May 21, 2014
Preview of the sexy Catty tube by The Hunter!
Preview of the awesome S&CO Cat Lover's Collab!
Preview of Mask #145, by me!
CT PTU TUT for the Catty tube by The Hunter and the S&CO Cat Lover's Collab!
Materials Needed
The Catty tube by The Hunter, which you get FREE with any $5 S&CO shop purchase HERE
The S&CO May Cat Lover's Collab, which you get FREE with any $10 S&CO shop purchase HERE
Mask #145, by me, which you can download HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! For this tag, I used a mask that I created, mask #145. Okay, open the mask...then, create a new image 800x800, with a transparent back. For this mask I used paper #5 by FwTags Creations...copy and paste it to the new image. Go to top and click LAYERS>NEW MASK LAYER>FROM IMAGE...choose mask...then merge group. I increased this mask by 10%, and centered it on the tag.
Open the Catty tube. Copy and paste her to the tag, reducing by 25% and place on the left....add screen. Re-paste her to the top right on the mask...reduce to fit...erase all but head...invert..add screen.
Open el 35 by Kissing Kate, reducing 25%, place bottom left.
Open el 4 by Designs by Joan, reduce 65%, place bottom right.
Open el 21 by FwTags Creations, reduce 80%, place on couch.
Open el 23 by Kissing Kate, reduce 40%, place bottom left corner.
Open el 4 by Kissing Kate, reduce 85%, place bottom left corner, front of trunks.
Open el 25 by FwTags Creations, reduce 40%, place bottom of tag, on mask layer.
Open el 35 by FwTags Creations, reduce 65%, place on right side, behind the couch layer.
Open el 38 by FwTags Creations, reduce 60%, place right side, behind table.
Open el 3 by FwTags Creations, reduce 80%, place on couch.
Open el 20 by FwTags Creations, reduce 80%, place on left, behind the couch.
Open el 2 by FwTags Creations, reduce 70%, place on the couch.
Open el 6 by Kissing Kate, reduce 70%, place on top of pillow on the couch.
Open el 9 by Kissing Kate, reduce 90%, place on the table.
Open el 2 by Designs by Joan, reduce 70%, place on the rug.
Open el 5 by Designs by Joan, reduce 85%, place on rug, in front of blocks.
Open el 6 by Designs by Joan, reduce 95%, place on rug, to the right of the bowl.
Open el 26 by FwTags Creations, reduce 85%, place on the table, behind the bottle.
Open el 8 by Chachaz Creationz, reduce 70%, place bottom left on trunks.
Open el 31 by Designs by Joan, reduce 95%, place on the pillow by the kitty.
Open el 37 by Kissing Kate, reduce 40%, place bottom right, on the cat house.
Open el 1 by FwTags Creations, reduce 90%, place bottom right.
Open el 49 by Designs by Joan, leaving the size as is, place on mask layer up top.
Open el 18 by Designs by Joan, reduce 90%, place on table.
Open el 32 by FwTags Creations, place up top on mask layer...D and reduce 50% and place on couch..D and FH and place on fireplace.
Open el 55 by FwTags Creations, reduce 60%, place top center.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Friday, May 16, 2014
Preview of the Night Fury tube by Danny Lee!
Preview of the Night Fury kit match by Designs By Joan!
Preview of Mask #23, by me!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Night Fury tube by Danny Lee, and the Night Fury scrap kit by Designs By Joan!
Materials Needed
The Night Fury tube by Danny Lee, which can be purchased at S&CO HERE
The Night Fury scrap kit by Designs By Joan, which can be purchased at S&CO HERE
Mask #23, created by me, which can be downloaded HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! Open whatever mask you chose, I chose a mask I created. Now create a new image 800x800, with a transparent back. Now for this mask, I used a paper instead of flood-filling; so open paper 1, and copy and paste it to the new image. Now, go to the top layers menu and click NEW MASK LAYER>FROM IMAGE..a pop up opens...click on the title of the mask you chose in the drop-down menu. Merge visible layers, then copy and paste it to the tag. Re-size and move as needed...for this one I increased the size by 5%, then centered it.
Now, open el 44, leaving the size as is, place it on the bottom right..D and FH, and place on bottom left...D and move back..go to the right one and D and move back.
Open el 65, leaving the size as is, place it centered at the bottom.
Open el, 54, reduce 25%, place on left, behind the gate.
Open el 46, reduce 35%, place on the right side, front of the house layer.
Open the full-view of the tube, reduce 30%, center on tag, front of the gate.
Open the close-up of the tube, place top right on mask, reduce to fit, invert, add screen blend mode.
Open el 10, reduce 60%, place bottom left, front of gate.
Open el 1, reduce 35%, place bottom left, front of el 10. .
Open el 33, reduce 60%, place bottom left in front of gate...D, FH and place on right side.
Open el 69, leaving the size as is..FH and place top left corner.
Open el 41, reduce 40%, place bottom right, front of gate.
Open el 47, reduce 30%, place bottom right, front of el 41.
Open el 57, reduce 60%, place bottom right, left of candle.
Open el 12, leaving the size as is, place centered on mask layer.
Open el 26, leaving the size as is, place top left by tree..D and FH and place top right by the close up.
Open el 19, reduce 60%, place bottom left, by trunk.
Open el 43, reduce 80%, place bottom left, front of el 19.
Open el 9, reduce 65%, place angled bottom right, behind the book.
Open el 21, reduce 80%, place bottom right, front of book.
Open el 37, leaving the size as is, place top right on mask layer below the close-up, D and reduce 60%, place top left...D and move over to the right a bit.
Open el 77, leaving the size as is, place on house layer.
Open el 23, reduce 10%, place bottom left on gate post.
Open el 60, reduce 60%, place angled top left.
Open el 64, leaving the size as is, place at the bottom, in front of flames.
Open el 32, reduce 40%, place bottom left by the dog.
Open el 34, reduce 80%, place bottom right corner, behind book.
Open el 12, reduce 70%, place bottom right on gate post..D and FH and place on the left side.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Subscribe to:
Posts
(Atom)
Licensed Reseller
Beautiful Blog Award
Designer That Inspires Award
Blog I Love Award
Rawk My Socks Award
CU License Tagging Obsessions
Niqui Designs CU License
CU License Scraps Dimensions
DzinesByMelz CU License
Anorie's CU License
CU License Lacarolita's Designz
CU License Tezza'a Dezignz
CU License Scrap and Tubes
Cakie Pot Pie CU License
Denise Creationz CU License
EW CU License
FDM CU License
More shops I CT for & Love
"
