Showing posts with label The Hunter. Show all posts
Showing posts with label The Hunter. Show all posts
Saturday, May 24, 2014
Preview of the sexy Beware tube by The Hunter!
Preview of the awesome Beware kit match by Designs By Joan!
Preview of Mask #173 by me!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Beware tube by The Hunter, and the Beware kit match by Designs By Joan!
Materials Needed
The Beware tube by The Hunter, which you can purchase at S&CO HERE
The Beware scrap kit by Designs By Joan, which you can purchase at S&CO HERE
Mask #173, by me, which you can download HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! For this tag, I used a mask that I created, mask #173. Okay, open the mask...then, create a new image 800x800, with a transparent back. For this mask I used paper #3...copy and paste it to the new image. Go to top and click LAYERS>NEW MASK LAYER>FROM IMAGE...choose mask...then merge group. I increased this mask by 10%, and centered it on the tag.
Open the full-view of the tube, reduce 15%, center, but slightly to the left.
Open el 18, reduce by 45%, place top right.
Open the close-up of the tube, place behind the window, reduce to fit...add screen blend mode.
Open el 33, reduce by 30%, place bottom left, behind the tube.
Open el 35, reduce by 60%, place on the left, behind the car.
Open el 15, reduce 15%, place on the bottom right corner, behind the dog.
Open el 76, reduce 40%, place bottom right on mask layer...D, FH and place on the left.
Open el 68, reduce 65%, place top left, over mask.
Open el 81, reduce 80%, place angled on the left, above the buildings.
Open el 75, reduce 30%, place top left.
Open el 6, reduce 40%, place bottom right, in front of window.
Open el 90, reduce by 80%, place top left.
Open el 62, reduce 40%, place center left on mask..FH.
Open el 61, reduce 80%, place bottom left in front of car.
Open el 73, reduce 90%, place top left on mask layer.
Open el 72, reduce 90%, place angled bottom of window.
Open el 42, reduce 40%, place bottom right corner.
Open el 16, reduce 90%, place bottom left, on car.
Open el 20, reduce 80%, place bottom right...FV..D and FH and place bottom left.
Open el 83, reduce by 60%, place on right, in front of window.
Open el 53, reduce 80%, place bottom left, by the bomb.
Open el 39, reduce 90%, place bottom right.
Open el 86, leaving the size as is, place top left on mask.
Open el 82, leaving the size as is, place top right, over window.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Friday, May 23, 2014
Preview of the stunning Vintag'Esk Dreamin kit by P-O Concept!
Preview of the gorgeous Precious tube by The Hunter!
Preview of Mask #135 by me!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Vintage'Esk Dreamin scrap kit by P-O Concept, featuring the Precious tube by The Hunter!
Materials Needed
The Vintage'Esk Dreamin kit by P-O Concept, which you get FREE with any $5 S&CO shop purchase HERE
The Precious tube by The Hunter, which you can purchase at S&CO HERE
Mask #135, by me, which you can download HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! For this tag, I used a mask that I created, mask #135. Okay, open the mask...then, create a new image 800x800, with a transparent back. For this mask I used paper #12...copy and paste it to the new image. Go to top and click LAYERS>NEW MASK LAYER>FROM IMAGE...choose mask...then merge group. I increased this mask by 10%, and centered it on the tag.
Open el 45, increase by 10%, place on bottom left.
Open el 38, reduce 10%, place bottom left in front of bridge corner.
Open the tube, reduce 40%, place bottom right, in front of bridge.
Open el 103, leaving the size as is, place top right, angled behind the tube.
Open el 11, reduce 60%, place left, on the bridge.
Open el 82, reduce 70%, place top on the mask, to the left of and behind the umbrella.
Open el 20, reduce 80%, place bottom left, against the bridge, behind the flowers.
Open el 25, reduce 15%, place on the right side, on the mask layer.
Open el 59, reduce 75%, place top left. side.
Open el 6, reduce 25%, place bottom left, in front of bridge...D and reduce 25% more and move to the right and down from the previous one...D again..FH and place on the left of the first one.
Open el 61, reduce 80%, place bottom right.
Open el 81, reduce 75%, place bottom in front of the tube, on el 61.
Open el 113, reduce 35%, place top left.
Open el 72, reduce 95%, place top right, under umbrella.
Open el 84, reduce 95%, place top right on the umbrella handle.
Open el 107, reduce 80%, place bottom left.
Open el 19, reduce 80%, place behind the bridge layer.
Open el 24, reduce 70%, place bottom center, in front of tube.
Open el 5, increase 10%, place horizontal under tube.
Open el 11, reduce 90%, place bottom left.
Open el 16, reduce 40%, place angled top center, behind the cat.
Open el 119, leaving size as is, place top left on the mask...D and FH and place top right.
Open el 115, reduce to fit on top of el 5.
Open el 56, leaving the size as is, place behind the bridge on mask layer...keep duplicating and flipping and place around on mask layer, where you like.
Open el 64, reduce 90%, place on the bottom left, behind the other flower.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Wednesday, May 21, 2014
Preview of the sexy Catty tube by The Hunter!
Preview of the awesome S&CO Cat Lover's Collab!
Preview of Mask #145, by me!
CT PTU TUT for the Catty tube by The Hunter and the S&CO Cat Lover's Collab!
Materials Needed
The Catty tube by The Hunter, which you get FREE with any $5 S&CO shop purchase HERE
The S&CO May Cat Lover's Collab, which you get FREE with any $10 S&CO shop purchase HERE
Mask #145, by me, which you can download HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! For this tag, I used a mask that I created, mask #145. Okay, open the mask...then, create a new image 800x800, with a transparent back. For this mask I used paper #5 by FwTags Creations...copy and paste it to the new image. Go to top and click LAYERS>NEW MASK LAYER>FROM IMAGE...choose mask...then merge group. I increased this mask by 10%, and centered it on the tag.
Open the Catty tube. Copy and paste her to the tag, reducing by 25% and place on the left....add screen. Re-paste her to the top right on the mask...reduce to fit...erase all but head...invert..add screen.
Open el 35 by Kissing Kate, reducing 25%, place bottom left.
Open el 4 by Designs by Joan, reduce 65%, place bottom right.
Open el 21 by FwTags Creations, reduce 80%, place on couch.
Open el 23 by Kissing Kate, reduce 40%, place bottom left corner.
Open el 4 by Kissing Kate, reduce 85%, place bottom left corner, front of trunks.
Open el 25 by FwTags Creations, reduce 40%, place bottom of tag, on mask layer.
Open el 35 by FwTags Creations, reduce 65%, place on right side, behind the couch layer.
Open el 38 by FwTags Creations, reduce 60%, place right side, behind table.
Open el 3 by FwTags Creations, reduce 80%, place on couch.
Open el 20 by FwTags Creations, reduce 80%, place on left, behind the couch.
Open el 2 by FwTags Creations, reduce 70%, place on the couch.
Open el 6 by Kissing Kate, reduce 70%, place on top of pillow on the couch.
Open el 9 by Kissing Kate, reduce 90%, place on the table.
Open el 2 by Designs by Joan, reduce 70%, place on the rug.
Open el 5 by Designs by Joan, reduce 85%, place on rug, in front of blocks.
Open el 6 by Designs by Joan, reduce 95%, place on rug, to the right of the bowl.
Open el 26 by FwTags Creations, reduce 85%, place on the table, behind the bottle.
Open el 8 by Chachaz Creationz, reduce 70%, place bottom left on trunks.
Open el 31 by Designs by Joan, reduce 95%, place on the pillow by the kitty.
Open el 37 by Kissing Kate, reduce 40%, place bottom right, on the cat house.
Open el 1 by FwTags Creations, reduce 90%, place bottom right.
Open el 49 by Designs by Joan, leaving the size as is, place on mask layer up top.
Open el 18 by Designs by Joan, reduce 90%, place on table.
Open el 32 by FwTags Creations, place up top on mask layer...D and reduce 50% and place on couch..D and FH and place on fireplace.
Open el 55 by FwTags Creations, reduce 60%, place top center.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Monday, May 19, 2014
Friday, May 16, 2014
Preview of the sexy and classy Michelle tube by The Hunter!
Preview of the Michelle 1 scrap kit by Devilish Dezines!
Preview of Mask #93, by me!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Michelle tube by The Hunter, and the Michelle 1 scrap kit by Devilish Dezines!
Materials Needed
The Michelle tube by The Hunter, which can be purchased at S&CO HERE
The Michelle 1 scrap kit by Devilish Dezines, which can be purchased at S&CO HERE
Mask #93, created by me, which can be downloaded HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! Open whatever mask you chose, I chose a mask I created. Now create a new image 800x800, with a transparent back. Now for this mask, I used a paper instead of flood-filling; so open paper 1, and copy and paste it to the new image. Now, go to the top layers menu and click NEW MASK LAYER>FROM IMAGE..a pop up opens...click on the title of the mask you chose in the drop-down menu. Merge visible layers, then copy and paste it to the tag. Re-size and move as needed...for this one, I left the size as is, but I duplicated it and flipped it horizontally.
Now, open el 21, reduce 25%, place on left side.
Open el 5, reduce 45%, place right side, behind el 21.
Open el 30, reduce 65%, place bottom left.
Open the full-view of the tube, reduce 35%, place bottom right.
Copy and paste tube to top right corner on mask layer, reduce to fit, erasing extra...invert, add screen blend mode.
Open el 2, reduce 30%, place top right of tower..D and FH and move this one down and to the right of the first one.
Open el 41, reduce 75%, place bottom right under tube...keep duplicating and moving till full.
Open el 10, reduce 70%, place bottom left under bridge...keep duplicating and moving upwards.
Open el 26, reduce 60%, place top left on the tower. 1
Open el 39, reduce 70%, place bottom right under tube, on top of leaves...D and FH.
Open el 3, reduce 25%, place top center, behind tower.
Open el 4, reduce 60%, FH and place bottom right.
Open el 19, reduce 80%, place center on rock wall.
Open el 13, leaving the size as is, place on mask layer..D and FH.
Open el 15, reduce 80%, place bottom left.
Open el 22, reduce 75%, place bottom left on other leaves..keep duplicating and moving til you are happy with it.
Open el 9, reduce 70%, place on tower..D, and place on rock wall.
Open el 37, reduce 80%, place bottom right corner, place 1/2 hidden by leaves.
Open el 14, reduce 90%, place bottom right, on top of el 37.
Open el 6, reduce 95%, place top center on the branch.
Open 34, leaving the size as is, and place on the tower.
Open el 47, reduce 70%, place top left...D and FH.
Open el 49, reduce 75%, place in top right corner.
Open el 44, reduce 70%, place bottom left on leaves..D, FH, and place on the right.
Open el 11, reduce 85%, place bottom left on bridge..D and reduce 10% more and move to the right.
Open el 35, reduce 40%, place left on bottom 1/2 of the tower.
Open el 2, reduce 70%, place bottom left on the bridge..D and move to the right...D again and move more to the right.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Subscribe to:
Posts
(Atom)
Licensed Reseller
Beautiful Blog Award
Designer That Inspires Award
Blog I Love Award
Rawk My Socks Award
CU License Tagging Obsessions
Niqui Designs CU License
CU License Scraps Dimensions
DzinesByMelz CU License
Anorie's CU License
CU License Lacarolita's Designz
CU License Tezza'a Dezignz
CU License Scrap and Tubes
Cakie Pot Pie CU License
Denise Creationz CU License
EW CU License
FDM CU License
More shops I CT for & Love
"
