Showing posts with label Danny Lee. Show all posts
Showing posts with label Danny Lee. Show all posts
Monday, May 26, 2014
Preview of the Sexy Dark tube by Danny Lee!
Preview of the Sexy Dark kit prev by Devilish Dezines!
Preview of Mask #202 by me!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Sexy Dark tube by Danny Lee, and the Sexy Dark scrap kit by Devilish Dezines!
Materials Needed
The Sexy Dark tube by Danny Lee, which you can purchase at S&CO HERE
The Sexy dark scrap kit by Devilish Dezines, which you can purchase at S&CO HERE
Mask #202, by me, which you can download HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! For this tag, I used a mask that I created, mask #202. Okay, open the mask...then, create a new image 800x800, with a transparent back. For this mask I used paper #6...copy and paste it to the new image. Go to top and click LAYERS>NEW MASK LAYER>FROM IMAGE...choose mask...then merge group. I reduced this mask by 10%, and centered it on the tag.
Open el 40, leaving the size as is, center on the mask.
Open el 38, reduce 20%, place bottom right...D and FH and place bottom left...D both sides and move back.
Open the full-view of the tube, reducing 30%, center on tag.
Open el 41, reduce 35%, place on right side.
Open el 25, reduce 20%, place on right side, in front of door..FH.
Open el 11, reduce by 25%, place on left side, behind the tube.
Open el 21, reduce 40%, place on bottom left, in front of tree.
Open el 13, reduce 25%, place top left...D and FH and move down and to the left of the first one.
Open el 37, reduce 15%, place to the left of the door.
Open el 30, reduce 60%, place on door.
Open el 31..FH, reduce 70%, place on door...D and move up the door.
Open el 37, reduce 30%, place bottom right, in front of tree...D and FH.
Open el 42, leaving the size as is, place on the door layer..D and FH.
Open el 37, reduce 35%, place on left side of planter..D and FH.
Open el 42, leaving the size as is, place on door layer..D and FH.
Open el 37, reduce 35%, place on left side of planter...D and FH.
Open el 24, reduce 40%, place on left side, in front of tree.
Open el 4, reduce 25%, place on bottom..FH.
Open el 20, reduce 80%, place on left in front of the tree...FH...D and FH, and place on right in front of tree.
Open el 12, reduce 60%, place bottom right, on door.
Open el 26, reduce 60%, on mask above the planter.
Open el 27, reduce 35%, place bottom left, in front of the dragon's tail.
Open el 2, reduce 20%, place on the left, in front of the planter.
Open el 43, reduce 70%, place on the left, on top of the planter.
Open el 28, leaving the size as is, place on top of the door layer.
Open el 1, reduce 70%, place on bottom right corner...D and FH, and place on left, behind the lantern.
Open el 46, reduce 50%, place on the left, behind the dragon.
Open el 17, reduce 75%, place on the bottom right corner.
Open el 36, reduce 90%, place angled on the bottom left, in front of the lantern.
Open el 10, reduce 70%, place on the right side, on the tree.
Open el 50, reduce 40%, place on the top, to the left of the tube..FH.
Open el 49, reduce 70%, place on the bottom right, in front of the tree.
Open el 35, reduce 80%, place behind the grass..D and FH and place on the right side, behind the skull.
Open el 29, leaving the size as is, place on the top left, under the purple clouds.
Open el 15, reduce 40%, place on the right on door.
Open el 19, leaving size as is, place over the bottom part of the door.
Open el 19, leaving the size as is, place on the top left..D and FH..reduce another 60%, place on top right.
Open el 7, reduce by 60%, place on bottom left, angled by the candle.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Sunday, May 25, 2014
Thursday, May 22, 2014
Friday, May 16, 2014
Preview of the Night Fury tube by Danny Lee!
Preview of the Night Fury kit match by Designs By Joan!
Preview of Mask #23, by me!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Night Fury tube by Danny Lee, and the Night Fury scrap kit by Designs By Joan!
Materials Needed
The Night Fury tube by Danny Lee, which can be purchased at S&CO HERE
The Night Fury scrap kit by Designs By Joan, which can be purchased at S&CO HERE
Mask #23, created by me, which can be downloaded HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! Open whatever mask you chose, I chose a mask I created. Now create a new image 800x800, with a transparent back. Now for this mask, I used a paper instead of flood-filling; so open paper 1, and copy and paste it to the new image. Now, go to the top layers menu and click NEW MASK LAYER>FROM IMAGE..a pop up opens...click on the title of the mask you chose in the drop-down menu. Merge visible layers, then copy and paste it to the tag. Re-size and move as needed...for this one I increased the size by 5%, then centered it.
Now, open el 44, leaving the size as is, place it on the bottom right..D and FH, and place on bottom left...D and move back..go to the right one and D and move back.
Open el 65, leaving the size as is, place it centered at the bottom.
Open el, 54, reduce 25%, place on left, behind the gate.
Open el 46, reduce 35%, place on the right side, front of the house layer.
Open the full-view of the tube, reduce 30%, center on tag, front of the gate.
Open the close-up of the tube, place top right on mask, reduce to fit, invert, add screen blend mode.
Open el 10, reduce 60%, place bottom left, front of gate.
Open el 1, reduce 35%, place bottom left, front of el 10. .
Open el 33, reduce 60%, place bottom left in front of gate...D, FH and place on right side.
Open el 69, leaving the size as is..FH and place top left corner.
Open el 41, reduce 40%, place bottom right, front of gate.
Open el 47, reduce 30%, place bottom right, front of el 41.
Open el 57, reduce 60%, place bottom right, left of candle.
Open el 12, leaving the size as is, place centered on mask layer.
Open el 26, leaving the size as is, place top left by tree..D and FH and place top right by the close up.
Open el 19, reduce 60%, place bottom left, by trunk.
Open el 43, reduce 80%, place bottom left, front of el 19.
Open el 9, reduce 65%, place angled bottom right, behind the book.
Open el 21, reduce 80%, place bottom right, front of book.
Open el 37, leaving the size as is, place top right on mask layer below the close-up, D and reduce 60%, place top left...D and move over to the right a bit.
Open el 77, leaving the size as is, place on house layer.
Open el 23, reduce 10%, place bottom left on gate post.
Open el 60, reduce 60%, place angled top left.
Open el 64, leaving the size as is, place at the bottom, in front of flames.
Open el 32, reduce 40%, place bottom left by the dog.
Open el 34, reduce 80%, place bottom right corner, behind book.
Open el 12, reduce 70%, place bottom right on gate post..D and FH and place on the left side.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Wednesday, May 14, 2014
Monday, May 12, 2014
Preview of the sweet Cupcake tube by Danny Lee!
Preview of the yummy Cupcake kit match by Lizquis Scraps!
Template #28 by me, which you can download below!
Mask Set Mask #1 by me, which you can download below!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Cupcake tube by Danny Lee, and the Cupcake kit match by Lizquis Scraps!
Materials Needed
The Cupcake tube by Danny Lee, which can be purchased at S&CO HERE
The Cupcake scrap kit by Lizquis Scraps, which can be purchased at S&CO HERE
Set Mask Mask #1, created by me, which can be downloaded HERE
Template #28, created by me, which can be downloaded HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! Open whatever mask you chose, I chose a mask I created. Now create a new image 800x800, with a transparent back. Now for this mask, I used a paper instead of flood-filling; so open paper 1, and copy and paste it to the new image. Now, go to the top layers menu and click NEW MASK LAYER>FROM IMAGE..a pop up opens...click on the title of the mask you chose in the drop-down menu. Merge visible layers, then copy and paste it to the tag. Re-size and move as needed...for this one I increased the size by 10%, then centered it.
Next, let's do our template. Open whatever template you have chosen; I used template #28 that I created. Ok, now place papers on your mask layers; they should be as follows: paper 9 on rasters 4 and c4, paper 8 on rasters 3 and c3, paper 6 on raster 2, and paper 2 on rasters 2, c5, 6, and c6.
Now, open the tube, with the hat on...reduce by 20%, and place centered on tag.
Open the close up of the tube and place on the top left in square...FH, reduce to fit then invert...multiply. Repeat process on bottom right square but do not flip.
Open the puppy, reduce 70%, place bottom right, beside tube.
Open the ribbon 1, leaving the size as is, place on bottom towards the right.
Open the ribbon 2, leaving the size as is, place on bottom towards the left...FV.
Open the lollipop 1, leaving the size as is, place angled on the top right.
Open the cupcake present, reduce 70%, place on bottom left, left of tube.
Open the cupcake 1, reduce 80%, place bottom right by the puppy, FH.
Open the milkshake, reduce 75%..FH, place bottom right, by cupcake. .
Open the gumball machine, reduce 25%, place bottom left.
Open the cupcake 2, reduce 80%, place bottom left, front of present and gumball machine.
Open the candy 1, reduce 90%, place bottom right, front of milkshake.
Open the lollipop 3, reduce 40%, place on left, behind gumball machine.
Open the ball, reduce 90%, place bottom right, front of puppy.
Open the butterflies, reduce 30%, place top right.
Open the bow 3, reduce 90%, place bottom left, angled on present.
Open the bow 1, reduce 45%, place angled top right, on the lollipop.
Open the flower 1, reduce 80%, and place top left.
Open the flowers 1, leaving the size as is, place bottom right behind other els.
Open the frame 1, reduce by 40%, place top right, under lollipop.
Open the spoon, reduce 40%, place bottom right.
Open the light 1, leaving the size as is, place in right circle.
Open the sparkles 2, leaving the size as is, and place top center on the pink rectangle.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Subscribe to:
Posts
(Atom)
Licensed Reseller
Beautiful Blog Award
Designer That Inspires Award
Blog I Love Award
Rawk My Socks Award
CU License Tagging Obsessions
Niqui Designs CU License
CU License Scraps Dimensions
DzinesByMelz CU License
Anorie's CU License
CU License Lacarolita's Designz
CU License Tezza'a Dezignz
CU License Scrap and Tubes
Cakie Pot Pie CU License
Denise Creationz CU License
EW CU License
FDM CU License
More shops I CT for & Love
"
