Sunday, May 4, 2014
Preview of the sexy Dempsey tube by Vi Nina!
Preview of the awesome Dempsey kit match by Designs by Joan!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Dempsey tube by Vi Nina, and the Dempsey kit match by Designs by Joan!
Materials Needed
The Dempsey tube by Vi Nina, which can be purchased at S&CO HERE
The Dempsey scrap kit by Designs by Joan, which can also be purchased at S&CO HERE
Mask 44 by Millie's PSP Madness, which can be downloaded on her blog HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! Open whatever mask you chose, I chose a mask by MPM. Now create a new image 800x800, with a transparent back. Now for this mask, I used a paper instead of flood-filling; so open paper 8, and copy and paste it to the new image. Now, go to the top layers menu and click NEW MASK LAYER>FROM IMAGE..a pop up opens...click on the title of the mask you chose in the drop-down menu. Merge visible layers, then copy and paste it to the tag. Re-size and move as needed...for this one I increased the size by 10%, then centered it.
Open el 25 the frame, increase by 40%, center.
Open close up view of the tube, reduce 15%, center on frame.
Open el 4, increase size to fit under frame. .
Open el 72, reduce 70%, place bottom right.
Open el 38, reduce 75%, place bottom right, right side of the bag.
Open el 60, reduce 80%, FH, place bottom right, over bag and champagne.
Open el 77, reduce 30%, place bottom center of frame.
Open el 76, reduce 90%, place bottom right, front of bag.
Open el 75, reduce 95%, place bottom right, on left of champagne.
Open el 8, reduce 85%, place on balls..D, place top right.
Open els 40, 61, 74, and 50, reduce 90%, place sporadically on frame.
Open el 14, reduce 80%, place bottom center, on el 8.
Open el 12, reduce 75%, place angled top left.
Open el 74, reduce 90%, place top left, center of bow.
Open el 73, reduce 85%, place on bottom left, and top right of flowers...D each 3 times to make darker.
Open el 1, reduce 90%, place bottom left and top right on flowers...D each 3 times to make darker.
Open el 57, reduce 90%, place angled top of champagne.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Preview of the stunning Pink Fashion tube by Andy Cooper!
Preview of the gorgeous Pink Fashion kit by FWTags Creations!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Pink Fashion tube by Andy Cooper, and the Pink Fashion kit match by FWTags Creations!
Materials Needed
The Pink Fashion tube by Andy Cooper, which can be purchased at S&CO HERE
The Pink Fashion kit match by FWTags Creations, which can also be purchased at S&CO HERE
Mask 56 by Wee Scots Lass, which can be downloaded on her blog HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! Open whatever mask you chose, I chose a mask by WSL. Now create a new image 800x800, with a transparent back. Now for this mask, I used a paper instead of flood-filling; so open paper 5, and copy and paste it to the new image. Now, go to the top layers menu and click NEW MASK LAYER>FROM IMAGE..a pop up opens...click on the title of the mask you chose in the drop-down menu. Merge visible layers, then copy and paste it to the tag. Re-size and move as needed...for this one I increased the size by 15%, then centered it.
Open el 61, reduce by 30%, and place on the right side.
Open el 28, reduce by 10%, place on the left side.
Open the full-view of the tube, reduce by 20%, center.
Copy and paste the full-view of tube again to behind the mirror...erase extra...add screen blend mode.
Open el 21, reduce 40%, place bottom left, in front of mirror.
Open el 69, reduce 60%, place bottom right, front of screen.
Open el 25, reduce 70%, place bottom right, bottom of table.
Open el 62, reduce 80%, place bottom, right of pillow.
Open el 63, reduce 85%, place bottom right, right of vase.
Open el 24, reduce 80%, place bottom right, front of pillow.
Open el 50, reduce 80%, place on the right side of mirror.
Open el 38, reduce 40%, place ride side of screen..D, FH, and place on left side of mirror.
Open el 26, reduce 90%, place on table.
Open el 39, reduce 90%, place on table, left of cream.
Open el 5, reduce 85%, place bottom left, bottom of chair.
Open el 8, reduce 90%, place bottom right, by candle.
Open el 66, reduce 95%, place on table, right of cream.
Open el 64, reduce 85%, place bottom left, bottom of chair.
Open el 11, reduce 85%, place bottom left, right of candle.
Open el 41, reduce 90%, place top right corner of mirror.
Open el 48, reduce 85%, place bottom right, front of pillow.
Open el 27, reduce 80%, place right side, behind cream.
Open el 47, reduce 50%, place on mask right side.
Open el 35, reduce 90%, place on chair.
Open el 55, reduce 95%, place on table.
Open el 14, reduce 90%, place on table.
Open el 42, reduce 60%, place on mask left side..D, FH, and place on right.
Open el 52, reduce 80%, place on right, on table.
Open el 9, reduce 90%, place on left, on chair back.
Open el 29, reduce 85%, place on bottom left, by shoes.
Open el 20, reduce 98%, place on left, on chair.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Saturday, May 3, 2014
Preview of the Gothic Vampire tube by The Hunter!
Preview of the Gothic Vampire kit by Devilish Dezines!
CT PTU TUT for the Gothic Vampire tube by The Hunter, and the Gothic Vampire kit match by Devilish Dezines!
Materials Needed
The Gothic Vampire tube by The Hunter, which can be purchased at S&CO HERE
The Gothic Vampire kit match by Devilish Dezines, which can also be purchased at S&CO HERE
Masks 81 and 289 by Wee Scots Lass, which can be downloaded on her blog HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! Let's create our mask layer! Open whatever mask you chose, I chose 2 masks by WSL..so open the mask 81 first. Now create a new image 800x800, with a transparent back. Now for this mask, I used a paper instead of flood-filling; so open paper 5, and copy and paste it to the new image. Now, go to the top layers menu and click NEW MASK LAYER>FROM IMAGE..a pop up opens...click on the title of the mask you chose in the drop-down menu. Merge visible layers, then copy and paste it to the tag. Re-size and move as needed..for this one I left the size as is, and centered it. Now open mask 289, and use paper 3 for this one...center on top of other mask.
Next, find and open the full-view of the tube, reduce it by 15%, and center it on the tag.
Open el 39, leave the size as is, place behind the tube.
Open el 20, increase 10%, place over el 39.
Open el 19, reduce 15%, place on bottom left...FH.
Open el 28, leave size as is, place bottom, under the tube's feet.
Open el 13, reduce by 20%, place bottom right...D, FH, and place bottom left.
Open el 41, reduce 60%, place bottom right, behind leaves.
Open el 26, reduce 40%, place bottom left, behind leaves.
Open el 25, reduce 30%, place top right corner.
Open el 24, reduce 50%, place top left corner.
Open el 17, reduce 45%, place bottom right.
Open el 22, reduce 70%, place left side of gate.
Open el 12, reduce 80%, place left side on mushrooms.
Open el 37, reduce 80%, place bottom left corner...FH..D..FH.
Open el 34, reduce 65%, place top left corner...D.
Open el 31, reduce 90%, place bottom right, by tube.
Open el 48, reduce 95%, place right of el 31.
Open el 30, reduce 60%, place bottom of leaves.
Open el 11, reduce 90%, place bottom right...FH.
Open el 2, reduce 90%, place bottom right.
Open el 7, reduce 85%, place bottom left corner...D...place on right behind casket.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Preview of Template 25, by me!
Preview of the wicked Rasta Gothic tube by Andy Cooper!
Preview of the kickin Rasta Gothic kit by Designz by Sue!
Snag Tag #1
Snag Tag #2
Snag Tag #3
Snag Tag #4
CT PTU TUT for the Rasta Gothic tube by Andy Cooper, and the Rasta Gothic kit by Designz by Sue!
Materials Needed
The Rasta Gothic tube by Andy Cooper, which can be purchased at S&CO HERE
The Rasta Gothic scrap kit by Designz by Sue, which can also be purchased at S&CO HERE
Template 25, made by me, which you can download HERE
PSP - I am using X5, but any should do
**This tutorial assumes that you have a working knowledge of basic functions in PSP. This tutorial is a creation of my own, and any similarities are purely coincidental. If you make something with one of my tuts or templates, please email it to me at robynebutts@gmail.com and I will post it her on my blog!
Okay, let's begin! First, we need to open the template #25, and add papers to it. The papers should be on the template as follows: paper 17 on the word art, paper 16 on rasters 8, C8, and 2, paper 9 on rasters 3, C3, 7, C7, paper 14 on rasters 9, and C9, paper 17 on rasters 6, C6, 4, C4, 5, 12, and C12.
Now, open the full-view of the Rasta Gothic tube, reduce her by 25%, and place centered on the tag. Go back to the tube and open the close-up layer, reduce to fit the black diamond shape on the top left and invert. Copy and paste to the right black diamond shape...FH and reduce to fit, then invert. Add a different texture to each close up.
Now, let's create our mask layer! For this tag I used a mask that was in the kit, so open el 36, reduce by 60%, and keep duplicating and placing anywhere you like on the background layer of the tag.
Open el 56, leave the size as is, place across the diagonal pink bar.
Open el 49, reduce to fit behind the circles...D each 3 times to make them show up darker.
Open el 48, leave the size as is, place on the bottom left...FH.
Open el 29, leave the size as is, place on the top right corner of the striped square...D FH and place on the top left corner.
Open el 10, reduce to fit, the black squares behind the close ups of the tube.
Open el 25, reduce 80%, place on the bottom right corner...FH.
Open el 1, reduce 70%, place bottom right, in front of the bear.
Open el 3, reduce 90%, place on bottom left of tube.
Open el 7, reduce 85%, place on bottom of the top of the right circles.
Open el 17, reduce 85%, place on bottom left on circles.
Open el 63, reduce 10%, place across the center of the tag.
Open el 43, reduce 90%, place on the top right, on razor blades layer.
Open el 65, reduce 80%, place on the left top of the bottom circle.
Open el 15, reduce 80%, place on bottom, to the left of cupcake.
Open el 8, reduce 85%, place on the top left, by the tube.
Open el 62, reduce 40%, place in both of the dark center circles.
Open el 24, reduce 85%, place on bottom left, by the skull.
Lastly, add 3D drop shadows on whatever elements you would like them on. I like these settings: 2V 1H 70 op, 4B. Make sure at this point that you add copyright info for the tube artist..you can also add info for the scrap maker if the tube maker's TOU allows. Make sure you check TOU's!
You did it! You have completed this tut! Now you can add personalization to your creation! I hope you enjoyed this tutorial; if you did, please follow my blog, and pass it on to others! Also, please email your creations with my tuts or templates, and I will happily display them here on my blog (robynebutts@gmail.com)!
Hugz and Blessings,
Robyne'
Friday, May 2, 2014
Subscribe to:
Posts
(Atom)
Licensed Reseller
Beautiful Blog Award
Designer That Inspires Award
Blog I Love Award
Rawk My Socks Award
CU License Tagging Obsessions
Niqui Designs CU License
CU License Scraps Dimensions
DzinesByMelz CU License
Anorie's CU License
CU License Lacarolita's Designz
CU License Tezza'a Dezignz
CU License Scrap and Tubes
Cakie Pot Pie CU License
Denise Creationz CU License
EW CU License
FDM CU License
More shops I CT for & Love
"
