Sunday, July 28, 2013
Tutorial using the August scrap kit by Bookworm Dezines, and featuring the Fairy Dust tube by TonyTz.
Supplies Needed
Paint Shop Pro - I am using X5, but any should do
The August scrap kit by Bookworm Dezines, which can be purchased at Scrap Candy HERE
The Fairy Dust by Tony Tz, which can be purchased at Tony Tz's shop HERE
Any color or gradient and font of your choosing
Okay, let's begin. The first thing you will need to do, is to start a new image in Paint Shop Pro (PSP for short). To do this, look at the top left corner, and click on FILE>NEW> a pop up will open...set width and height to 600, make background transparent, and make sure the transparent box is checked. Click okay, and you now have a blank size base for your tag, already sized and ready to go.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
We will not be using a paper or a mask for this tag. First thing, let's add background sparkles. Find and open the EL 23 sparkles. Leave the size as is..duplicate 2 times, flip it horizontally and duplicate it 2 times, flip it vertically and duplicate it 2 times. Now, let's add some other items to start adding depth and dimension to our tag! Find the Fairy Dust tube and open her. Reduce her size by 60% and center her on the tag. Now find and open the El #35 ring of leaves. reduce it by 25% and center it on the tag. Use the side layers menu and slide the tube back to the forefront.
Next, find and open El #12 flowers and reduce it by 25%. Place one in each of the four corners. Next, find and open El #3 the stone, and reduce it by 65% and place one in the center of each of the 4 corner flowers. Now find and open then EL #15 the striped vine stalks and reduce the size by 25% and place on the right side. Duplicate and flip it horizontally and place on the left side. Slide the tube the the forefront again. next, find and open the El # 8 yellow flower. Reduce the size by 45% and place it on the bottom left. Duplicate and flip it horizontally and place on the bottom right. Use the side layers menu and slide the tube back to the forefront once again.
Now find and open El # 30 cupcake, and reduce it by 80%. Place it on the left above the yellow flower; duplicate it and flip it horizontally and place above the yellow flower on the right side. Next, find and open the El #22 sucker and reduce it by 90%. Place on the right side, duplicate and flip it horizontally and place on the left side. Now find the El #31 the clock. reduce it by 15% and center it behind the tube, Next, find and open the El #40 green flower and reduce it by 45% and place it on the bottom left under the cupcake. Duplicate and flip it horizontally and place on the right side, under the cupcake. Slide the corner flowers and the stones back to the forefront. Lastly, find and open the El #1 pear shaped stone. reduce it by 80% and place it on the left side to the left of the cupcake, and on the right side, to the right of the cupcake.
You did it! You now have finished this tag. You will need to add copy wright info to your tag, as it is the law. Finally, add a name in any font and color of your choosing.
I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to meat robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Matching timeline cover I created using the August scrap kit Bookworm Dezines, and the Fairy Dust tube by Tony Tz.
Preview of the August kit by Bookworm Dezines, which can be purchased at Scrap Candy HERE
Preview of the FREEBIE cluster frame created using the August scrap kit by Bookworm Dezines!
FREEBIE cluster frame using the August scrap kit by Bookworm Dezines. You can download this frame by simply right-clicking on the image below, and saving it to your computer. Please do NOT claim as your own work; either link back here to my blog, or to the shop link where this kit can be purchased...thank you!
Friday, July 26, 2013
Tutorial using the Rosez N Skullz scrap kit by Crystal's Creations
Supplies Needed
Paint Shop Pro - I am using X5, but any should do
The Rosez N Skullz scrap kit by Crystal's Creations, which can be purchased at Pics for Design HERE
Any color or gradient and font of your choosing
Any mask of your choosing
Okay, let's begin. The first thing you will need to do, is to start a new image in Paint Shop Pro (PSP for short). To do this, look at the top left corner, and click on FILE>NEW> a pop up will open...set width and height to 600, make background transparent, and make sure the transparent box is checked. Click okay, and you now have a blank size base for your tag, already sized and ready to go.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
I have chosen a mask from PSP-Pals. Okay, in Paint Shop Pro (PSP) click FILE>OPEN>and open the mask you have chosen, then start a new image FILE>NEW>600x600 and transparent needs to be checked. Choose color or gradient on the right side layers menu; I chose a yellow gradient...flood fill the new blank image with the color or gradient..the flood fill is the paint bucket shape. Now go to the top layers menu and click NEW MASK LAYER> from image...a pop up opens..click on the title of the mask you chose in the drop down menu. now go back to the side layers menu and click on the square that has the layers combined...right click it then click merge..the merge group..and voila..you have a mask layer now! :) We will not be using a paper for this tag.
Now, let's add some other items to start adding depth and dimension to our tag! Find the El #16 the girl poser and open her. reduce her size by 45% and center her on the tag. Now find and open the El #25 metal fence. Place on top of the mask and decrease the sides to match the mask. Now use the side layers menu and slide the poser back to the forefront. Now find and open theEl #30 purple flames and decrease the size by 30% and place on the left side of the tube...duplicate and flip it horizontally and place it on the right side of the tube. Again, use the side layers menu and slide the poser back to the forefront. Now find and open the El 27 black glitter splats and reduce the size by 75%, and place on the right side...duplicate and flip it horizontally and place on the left.
Next, find and open the El #14 sequins and reduce the size by 60% and place on the bottom right-hand side. Duplicate it and flip it horizontally and place on the bottom left. Use the side layers men u and slide it to the forefront. Now find and open the El #11 bunny and reduce it by 70%, and place it on the bottom left, and slide it to the forefront. Next, find and open EL #12 skull with roses and decrease the size by 70% and place it on the bottom right; slide it to the forefront.Now find and open the El #38 beads on a string and reduce by 45%. Place on the right side and make sure it is behind the elements on the bottom of the tag. Duplicate and flip it horizontally and place it on the left side.
Next, find and open the El #33 bottlecap and reduce it by 25%, and place it to the right of the bunny. Use the side layers menu and slide it to the forefront. Next, find and open the El# 32 heart and reduce it by 65% and place it on the bottom, to the left of the skull. Now find and open the El# 31 heart and wings. leave the size as is and place it at the top, centered. Now find and open the El# 6 lips and reduce it by 90% and place them right below the yellow heart. Now find and open the El#36 the pink and purple rose and reduce it by 90% and place it on the left side between the bunny and the bottle cap.Lastly, find the El#9 and place on both sides, next to the beads..make sure the sticks are slid behind other elements.
You did it! You now have finished this tag. You will need to add copy wright info to your tag, as it is the law. Finally, add a name in any font and color of your choosing.
I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to meat robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Matching timeline cover I created using the the Rosez N Skullz scrap kit by Crystal's Creations, which can be purchased HERE
Preview of the Rosez N Skullz kit by Crystal's Creations!
Preview of the freebie cluster frame I created using this awesome kit!
FREEBIE cluster frame I created using the Rosez N Skullz scrap kit by Crystal's Creations. You can download this frame by simply right-clicking the image below, and saving it to your computer. (It is in PNG format). Please do NOT claim as your own work; either link back her to my blog, or to the shop link where this kit can be purchased...thank you!
Thursday, July 25, 2013
Tutorial using the Beachcomber scrap kit by Inzpired Creationz, featuring the Blanche tube by VeryMany.
Supplies Needed
Paint Shop Pro - I am using X5, but any should do
The Beachcomber scrap kit by Inzpired Creationz, which can be purchased at Pimp my tags with Scraps HERE
The Blanche tube by VeryMany, which can be purchased at Pics for Design HERE
Any color or gradient and font of your choosing
Okay, let's begin. The first thing you will need to do, is to start a new image in Paint Shop Pro (PSP for short). To do this, look at the top left corner, and click on FILE>NEW> a pop up will open...set width and height to 600, make background transparent, and make sure the transparent box is checked. Click okay, and you now have a blank size base for your tag, already sized and ready to go.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
We will not be using a paper in this tag! Now, let's start building this tag from the bottom up. First, find and open the water #2. Leave the size as is and keep duplicating and flipping it horizontally, until it completely covers the top half of the tag, in a way that you feel looks good. Now repeat the same process on the bottom half of the tag, with the sand #1. Now let's add our tube. Find and open the Blanche tube..hide all layers except her full view with the aqua flower and swimsuit...merge the visible layers...copy it and paste it to the tag. Reduce her size by 45% and center her on the tag.
Now, let's add some other items to start adding depth and dimension to our tag! To start off, let's add the clouds #2. Find and open the clouds #2 and reduce the size by 85% and place it in the top right corner...duplicate 3 times. Duplicate again and flip it horizontally and place in top left corner...duplicate 3 times. Now find and open the palm tree and reduce it by 40%, Place it behind the tube on the left side; duplicate it and flip it horizontally and place on the right side behind the tube and...take care to ensure the bottom of the tree is not showing and is hidden behind the tube.
Now let's find and open the boardwalk sign. Reduce it by 40% and place it on the left side of the tag, behind the tube. Now find and open the posts and reduce their size by 75%. Place them at the bottom of the boardwalk sign; use the side layers menu and bring them to the forefront. Now find and open the grass #2. Reduce the size by 90%. Place one on the bottom right behind the tube's hand, and place another on the left side at the bottom of the posts. Again, use the side layers menu to slide the grass to the forefront.
Now find and open the flip flops and reduce their size by 90%. Place them in front of the grass, on the right side of the tag. Now find and open the boat #2 and reduce it by 90%. Place it on the top left behind the trees a bit...duplicate and flip it horizontally and place on the right side a bit in the trees. Now find and open the message in a bottle #1 and reduce the size by 90%. Place it to the right of the poles. Next, find and open the seashell #1 and reduce it by 90%, and place it on the bottom right. Next, find and open the starfish #2 and reduce the size by 90% and place on the bottom right side, to the right of the tube's hand. Lastly, find and open the sparkles #1...leave size as is and keep duplicating and flipping until you are happy with how it looks.
You did it! You now have finished this tag. You will need to add copy wright info to your tag, as it is the law. Finally, add a name in any font and color of your choosing.
I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to meat robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Matching timeline cover I created using the Beachcomber scrap kit by Inzpired Creationz,which can be purchased at Pimp my Tags with Scraps HERE and the Blanche tube by Very Many, which can be purchased at Pics for Design HERE
Preview of the awesome Beachcomber scrap kit by Inzpired Creationz!
Preview of the FREEBIE cluster frame I created using the Beachcomber scrap kit by Inzpired Creationz!
FREEBIE CLUSTER FRAME!!! You can download this frame by simply right-clicking on the link below, and saving it to your computer. Please do NOT claim this as your own work; either link back here to my blog, or link to the shop where this kit can be purchased...thank you!
Wednesday, July 24, 2013
Tutorial using the Champagne & Mistletoe scrap kit by Wicked Creationz.
Supplies Needed
Paint Shop Pro - I am using X5, but any should do
The Champagne & Mistletoe scrap kit by Wicked Creationz, which can be purchased at Scrappin Dollars HERE
Any color or gradient and font of your choosing
Okay, let's begin. The first thing you will need to do, is to start a new image in Paint Shop Pro (PSP for short). To do this, look at the top left corner, and click on FILE>NEW> a pop up will open...set width and height to 600, make background transparent, and make sure the transparent box is checked. Click okay, and you now have a blank size base for your tag, already sized and ready to go.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
Okay let's start building this tag from the bottom up! First, let's add a nice paper to add some color to your tag. To do this, click on FILE>OPEN> find paper # 7 and open it, then click on the pick tool on the tool menu on the left (it looks like an arrow)..a white dotted line will surround the paper, now click EDIT>COPY> find the image 1 tab at the top and click on it...you will do this every time to paste new items as you want to keep building on Image 1 (this is your tag), now click EDIT>PASTE AS NEW LAYER.
Now, let's add some other items to start adding depth and dimension to our tag! Find the El #3 the house, and open it. Increase the size by 25% and place it centered on the tag Next find and open El #28 the poser girl, and reduce her size by 70% and place her on the bottom, near the right side of the house door. Next, find and open the El #11 ladder and reduce the size by 60%. Place it on the right side of the house and increase the height up to the chimney. Next, find and open the EL #21 the North Pole sign and reduce its size by 75%. Place it on the bottom left area of the house. Use the side layers menu and make sure it is in the forefront.
Now find and open the El #1 candy cane light poles. Reduce the size by 60% and place on the left side of the house. Slide the North Pole sign in front of them. Next, find and open the El #20 the elf, and reduce him by 85% and place him towards the top of the ladder. use the side layers menu to slide him to the forefront. Now find and open the EL # 15 garlands and leave the size as is, and place it at the center top of the tag. Now find and open the EL #25 bows and reduce them by 50% and place one on each end of the garland.
Now find and open the El #29 flower and reduce it by 95% and place one in the center of each of the bows. Next, find and open the El#22 gift and reduce it by 85% and place it at the left bottom of the ladder. Now find and open El#7 the cupcake and reduce it by 60% and place it on the bottom left of the poser. Lastly, find and open the El#31 and reduce the size by 80% and place it at the bottom of the ladder.
You did it! You now have finished this tag. You will need to add copy wright info to your tag, as it is the law. Finally, add a name in any font and color of your choosing.
I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to meat robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Matching timeline cover I created using the Champagne & Mistletoe scrap kit by Wicked Creationz!
Preview of the freebie cluster frame I created using the Champagne & Mistletoe scrap kit by Wicked Creationz.
Here is a FREEBIE cluster frame I created using the Champagne & Mistletoe scrap kit by Wicked Creationz, which can be purchased at Scrappin Dollars HERE Feel free to snag and use it, but please link back to my blog, the designer's blog, or the link to where the kit can be purchased...do not claim it as your own work..ty!
Wednesday, July 17, 2013
Tutorial using the Heavenly Angels scrap kit by Jenny's Designz, and featuring the Angel tube by VeryMany
Supplies Needed
Paint Shop Pro - I am using X5, but any should do
The Heavenly Angels scrap kit by Jenny's Designz, which can be purchased at Sweet Pin-Ups HERE
The Angel tube by VeryMany, which can be purchased at Pics for Design HERE
Any color or gradient and font of your choosing
Okay, let's begin. The first thing you will need to do, is to start a new image in Paint Shop Pro (PSP for short). To do this, look at the top left corner, and click on FILE>NEW> a pop up will open...set width and height to 600, make background transparent, and make sure the transparent box is checked. Click okay, and you now have a blank size base for your tag, already sized and ready to go.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
Alrighty, let's get started building this tag. First off, we want to add a paper. So find and open the paper #5 and reduce it to fit the tag. Now find and open the Angel tube. On the side layers menu, hide the close up view, the signature and the background...then merge the visible layers...copy it and paste it onto the tag. reduce her by about 65% and center her on the tag, towards the bottom. Next, find and open the gate and reduce it by 85%. Center it at the bottom of the stairs. use the side layers menu and slide the tube back up to the forefront.
Now, find and open the curtain and reduce it by 70%. Place it at the top of the tag. Find and open the corner, and reduce it by 75%. Place it on the top left corner....duplicate it and flip it horizontally and place it on the top right corner. Next, find and open the flying birds, and reduce it by 75%. Place it on the top right where the big bird is by the curtains...duplicate and flip it horizontally and place on the right near the curtain. Now duplicate this one and move it down a bit...duplicate one more time, flip it horizontally and place it on the other side..also a little lower than the first bird.
Now find and open the arch and reduce it by 85% and place it at the top of the stairs. Next, find and open the golden border, and reduce it by 80%. Place it at the top in the center, between the curtains. Then place it all across the bottom of the tag. next, find and open the pool and reduce it by 80%. Place it towards the back, on the right side. next find and open the swans and reduce them by 90% and place them in the pool. Now find and open the candle and reduce it by 90%. Place one on each bottom side of the gate.
Now find and open the flower #6 and reduce it by 85% and place it on the top of the gate rail, and on both sides of the bottom of the arch, going in opposite directions. next, find and open the halo and reduce it by 95%. Place it on the tube's head, and use the side layers menu and slide it to the tube layer so it shows up on her head. now find and open the key butterfly and reduce it by 90% and place it on the gate rail.
Now find and open the pillar #1 and reduce it by 75%. Place it on the bottom left then duplicate and flip it horizontally and place it on the bottom right. Next, find and open flower #5 and reduce it by 95%. Now find and open the bell, and reduce it by 95% and place it on the top of the right side pillar, duplicate and flip it horizontally and place it on top of the right column. Lastly, find and open the glitter trail and reduce it by 70%. Keep duplicating and flipping it horizontally and vertically all over the tag, until you are happy with how it looks.
You did it! You now have finished this tag. You will need to add copy wright info to your tag, as it is the law. Finally, add a name in any font and color of your choosing.
I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to meat robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Matching timeline cover I created using the Heavenly Angels scrap kit by Jenny's Designz, which can be purchased at Sweet Pinup HERE and the Angel tube by VeryMany, which can be purchased at pics for Design HERE
Preview of this awesome kit!
Preview of the FREEBIE cluster frame I created using the Heavenly Angel scrap kit by Jenny's Designz.
FREEBIE cluster frame!!! You can download this frame by simply right-clicking on the image below, and saving it to your computer. Please do NOT claim as your own work; either link back here to my blog, or to the shop link where this kit can be purchased...thank you!
Tuesday, July 16, 2013
Tutorial using the Multycolor scrap kit by KizzedByKelz, and featuring the matching Multycolor tube by Arthur Crowe
Supplies Needed
Paint Shop Pro - I am using X5, but any should do
The Multycolor scrap kit by KizzedByKelz, which is available for purchase at Arthur Crowe's Factory, with the matching tube HERE
Any color or gradient and font of your choosing
Okay, let's begin. The first thing you will need to do, is to start a new image in Paint Shop Pro (PSP for short). To do this, look at the top left corner, and click on FILE>NEW> a pop up will open...set width and height to 600, make background transparent, and make sure the transparent box is checked. Click okay, and you now have a blank size base for your tag, already sized and ready to go.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***
Okay, let's get started. First, find and open the paper #3 and reduce it by 65% and place it angled like a diamond. Next, find and open paper #10 and reduce it by 15%, and place it behind the other paper. Now open your full view multycolor tube and reduce her by 35% and center her on the tag. Next, open the skate and reduce it by 45% and place it angled on the bottom right corner. Next, find and open skate 2, and reduce it by 45% and place it angled in the bottom left corner.
Now, find and open the speakers and increase their size by 25%, and place them behind the tube, around her waist area. now find and open the nail polish and reduce it by 90% and place it on the far right speaker end. Next, find and open the lipstick and reduce it by 95% and place it to the left of the nail polish...now flip it horizontally. Next, find and open the cupcake and reduce it by 75% and place it on the left side, above the skate.
Now find the glove and reduce it by 90% and place it angled on the right side above the speaker. Now find and open the cell phone and reduce it by 90% and place it angled on the right above the lipstick. Next find and open the ipod and reduce it by 85%. Place it on the left side top op speaker. Next, find and open the sunglasses and reduce them by 90%, and place them angled on the left side, behind the cupcake...you will have to slide the cupcake back to the forefront.
Now find and open the wing skull and reduce it by 15%. Place it centered behind the tube's shoulders, and then slide it down to the speakers layer. Next, find and open the sparkle. Leave the size as is and place it on the top left...duplicate and flip it horizontally and place it on the top right. Find and open the sparkles #2 and just keep duplicating it and flipping it in different direction until you are happy with how the sparkles look. lastly find and open the kiss and reduce it by 80%. Place it in the top left corner, duplicate and flip it horizontally and place it on the top right corner.
You did it! You now have finished this tag. You will need to add copy wright info to your tag, as it is the law. Finally, add a name in any font and color of your choosing.
I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to meat robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Matching timeline cover I created using this kit and tube!
Tutorial using the Magical Dream scrap kit by Inzpired Creationz, featuring the Flower Fairy tube by VeryMany
Supplies Needed
Paint Shop Pro - I am using X5, but any should do
The Magical Dream scrap kit by Inzpired Creationz, which can be purchased at Pimp my Tags with Scraps HERE
The Flower fairy tube by VeryMany, which can be purchased at Pics for Design HERE
Any color or gradient and font of your choosing
Okay, let's begin. The first thing you will need to do, is to start a new image in Paint Shop Pro (PSP for short). To do this, look at the top left corner, and click on FILE>NEW> a pop up will open...set width and height to 600, make background transparent, and make sure the transparent box is checked. Click okay, and you now have a blank size base for your tag, already sized and ready to go.
***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront)***
We will not be using a paper in this tag! Now, let's add our Flower fairy tube, in the full view in pink. Reduce her by 40% and place her centered on the tag toward the bottom. Now open the grass and leave the size as is. Place it on the bottom left and then flip it and duplicate it and place on the bottom right, Slide the poser to be on top of the grass, and angle her slightly so it appears as if she is sitting on the grass. now find and open the lamp post, and reduce it by 35% and place it on the right side...duplicate it and flip it horizontally and place it on the left side. Now find and open the flowers #2 and reduce it by 85% and place on the left bottom by the lamp post.
Now find and open the mushroom #1 and reduce it by 85% and place on bottom right. Now find and open the kitty and reduce it by 90% and place it on top of the mushroom. Now open the fairy dust and reduce it by 95% and place it on the bottom right between the post and the mushroom. Now find and open the mushroom #2 and reduce it by 95% and place on the bottom left, in front of the pot. Now find and open the butterfly #1 and reduce it by 90%, and place it on the left, angled at the top of the post and duplicate it and flip it horizontally and place on the right side.
Now find and open the dragonfly and reduce it by 95% and place it angled on the bottom right, to the left of the fairy dust. Next, find and open the lanterns and reduce it by 85% and place in the top left corner. Keep duplicating it and moving it over, until you reach the end of the top. Now find and open the clouds, and reduce it by 85%. Place one on the top left, then duplicate it and flip it horizontally and place it on the top right side. Now open the flower #5 and reduce it by 95% and place it on the bottom left side, and slide it in front of the mushroom.
Now find and open the flowers and reduce them by 35%. Place it on the right next to the lamp post...duplicate and flip it horizontally and place on the left next to the lamp post. now find and open the sparkles 1 and leave the size as is. Place it at the top, duplicate it and flip it horizontally. Now find the scattered stars and open them. Leave the size as is and place on the left side...duplicate, flip it horizontally and place it on the right. Slide the flowers back to the forefront. Now find and open the rose 1 and reduce it by 95% and place on the left by the mushroom and slide it to the grass layer on the layers menu.
Next, find and open the bow #1 and reduce it by 70%. Place it in the top left corner, then duplicate it and flip it horizontally and place it in the top right corner. Now find and open flower #1 and reduce it by 95% and place it on the bottom right. Now open the pear #2 and reduce it by 90% and place it on the bottom right, to the left of flower 1 and partially behind the dragonfly. Now find and open the flower #1 and reduce it by 95% and place it to the bottom right of the pear. Now find and open flower #2 and reduce it by 90%. Place it on the bottom left behind her foot. Lastly, find the bird and open it and reduce it by 90%. Flip it horizontally and place it on the pot of flowers on the left.
You did it! You now have finished this tag. You will need to add copy wright info to your tag, as it is the law. Finally, add a name in any font and color of your choosing.
I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to meat robynebutts@gmail.com, so I can place it on my blog.
Hugs and blessings,
Robyne
Matching timeline cover I created using the Magical Dream scrap kit by Inzpired Creationz, which can be purchased at Pimp my Tags with Scraps HERE and the Flower fairy tube by VeryMany, which can be purchased at Pics for Design HERE
Preview of the awesome Magical Dream scrap kit by Inzpired Creationz!
Preview of the FREEBIE cluster frame I created using this kit!
FREEBIE cluster frame I created using the Magical Dream scrap kit by Inzpired Creationz. You can download this frame by simply right-clicking on the image below, and saving it to your computer. (It is in PNG format). Please do NOT claim as your own work; either link back here to my blog, or link to the shop where this kit can be purchased...thank you!
Subscribe to:
Posts
(Atom)
Licensed Reseller
Beautiful Blog Award
Designer That Inspires Award
Blog I Love Award
Rawk My Socks Award
CU License Tagging Obsessions
Niqui Designs CU License
CU License Scraps Dimensions
DzinesByMelz CU License
Anorie's CU License
CU License Lacarolita's Designz
CU License Tezza'a Dezignz
CU License Scrap and Tubes
Cakie Pot Pie CU License
Denise Creationz CU License
EW CU License
FDM CU License
More shops I CT for & Love
"
