Whisper In The Wind Designs : Multycolor scrap kit by KizzedBy Kelz, and matching Multycolor tube by Arthur Crowe

Tuesday, July 16, 2013

Multycolor scrap kit by KizzedBy Kelz, and matching Multycolor tube by Arthur Crowe - CT tag & Tutorial

5:56 PM | Posted by Unknown | Edit Post

Tutorial using the Multycolor scrap kit by KizzedByKelz, and featuring the matching Multycolor tube by Arthur Crowe

Supplies Needed

Paint Shop Pro - I am using X5, but any should do

The Multycolor scrap kit by KizzedByKelz, which is available for purchase at Arthur Crowe's Factory, with the matching tube HERE

Any color or gradient and font of your choosing

Okay, let's begin. The first thing you will need to do, is to start a new image in Paint Shop Pro (PSP for short). To do this, look at the top left corner, and click on FILE>NEW> a pop up will open...set width and height to 600, make background transparent, and make sure the transparent box is checked. Click okay, and you now have a blank size base for your tag, already sized and ready to go.

***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***

Okay, let's get started. First, find and open the paper #3 and reduce it by 65% and place it angled like a diamond. Next, find and open paper #10 and reduce it by 15%, and place it behind the other paper. Now open your full view multycolor tube and reduce her by 35% and center her on the tag. Next, open the skate and reduce it by 45% and place it angled on the bottom right corner. Next, find and open skate 2, and reduce it by 45% and place it angled in the bottom left corner.

Now, find and open the speakers and increase their size by 25%, and place them behind the tube, around her waist area. now find and open the nail polish and reduce it by 90% and place it on the far right speaker end. Next, find and open the lipstick and reduce it by 95% and place it to the left of the nail polish...now flip it horizontally. Next, find and open the cupcake and reduce it by 75% and place it on the left side, above the skate.

Now find the glove and reduce it by 90% and place it angled on the right side above the speaker. Now find and open the cell phone and reduce it by 90% and place it angled on the right above the lipstick. Next find and open the ipod and reduce it by 85%. Place it on the left side top op speaker. Next, find and open the sunglasses and reduce them by 90%, and place them angled on the left side, behind the cupcake...you will have to slide the cupcake back to the forefront.

Now find and open the wing skull and reduce it by 15%. Place it centered behind the tube's shoulders, and then slide it down to the speakers layer. Next, find and open the sparkle. Leave the size as is and place it on the top left...duplicate and flip it horizontally and place it on the top right. Find and open the sparkles #2 and just keep duplicating it and flipping it in different direction until you are happy with how the sparkles look. lastly find and open the kiss and reduce it by 80%. Place it in the top left corner, duplicate and flip it horizontally and place it on the top right corner.

You did it! You now have finished this tag. You will need to add copy wright info to your tag, as it is the law. Finally, add a name in any font and color of your choosing.

I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to meat robynebutts@gmail.com, so I can place it on my blog.

Hugs and blessings,

Robyne

Matching timeline cover I created using this kit and tube!