Whisper In The Wind Designs : Wild Cat by Designs by Sarah, featuring the Princess tube by Misticheskaya

Wednesday, July 10, 2013

Wild Cat by Designs by Sarah, featuring the Princess tube by Misticheskaya - CT Tag, tut, & FREEBIE cluster frame

4:11 PM | Posted by Unknown | Edit Post

Tutorial using the Wild Cat scrap kit by Designs by Sarah, and featuring the Princess tube by Misticheskaya

Supplies Needed

Paint Shop Pro - I am using X5, but any should do

The Wild Cat scrap kit by Designs by Sarah, which can be purchased at Pimp my Tags with Scraps HERE

The Princess tube by Misticheskaya, which can be purchased at Pics for Design HERE

Any color or gradient and font of your choosing

Okay, let's begin. The first thing you will need to do, is to start a new image in Paint Shop Pro (PSP for short). To do this, look at the top left corner, and click on FILE>NEW> a pop up will open...set width and height to 600, make background white, and make sure the transparent box is not checked. Click okay, and you now have a blank size base for your tag, already sized and ready to go.

***(NOTE: there is a layers menu on the right side of your screen..if u do not see it then look up top and click VIEW>PALETTES>LAYERS and it will open up...u use this layer to bring things to the front..say for example u put a shoe on the tag but it went behind a bucket and u want it in front of the bucket...while holding the left click button on your mouse or touch pad down, you would slide the shoe to the layer the bucket is on..it would now be in the front...use this anytime u want to bring something to the forefront.)***

We will not be using a paper for this tag. So, we will start out by opening our tube...you want her in the blue outfit..then reduce her by 45% and center her on the tag. Next, find and open print #1 and increase it by 15% and center it behind the tube. Next, open the print #4 and decrease it by 10% and place it on the right side...duplicate and flip horizontally and place it on the left side. use the side layers menu and slide them to the very back.

Now let's open the print #5 and leave the size as is and center it on the tag. Use the side layers menu and slide the print #1 back to the forefront. next, find and open the print #2 and leave the size as is. Place it on the top 1/2 of the tag, then duplicate and place it on the bottom half of the tag. Next, find and open print #3. Leave the size as is and place it at the bottom right underneath the tube, on the right side. Keep duplicating and flipping horizontally until it goes all the way to the bottom of the tag ..now repeat this process on the left side bottom of the tag.

Now, find and open the swirl #1 and reduce it by 70%, and place it on the right side...duplicate it and flip it horizontally and place on the left side. Use the side layers menu and slide it down to the brown print layer. Now find and open the string #2 and reduce the size by 70% and place it on the left side of the tube's head...duplicate it and flip it horizontally...duplicate again, and place it on the right side of the tube's head...duplicate one more time and flip it horizontally. Now find and open button #1 and reduce it by 70% and place it in the center of the string flowers.

Now, find and open the print #5 again, and place it at the center bottom. Now open the word art and reduce it to fit inside this area. Next, find and open the sequins and reduce it by 80% and place it on the right side...duplicate it and flip it horizontally and place on the left side. Next, find and open the cupcake and reduce it by 60% and place it on the bottom left. Now open flower #2 and reduce it by 85% and place it on the bottom left of the cupcake. Next, open the heart tag and reduce it by 85% and place it angled on the bottom right side of the cupcake.

Now find and open the milkshake and reduce it by 80% and place it on the bottom right. Next, find and open the flower 3 and reduce it by 80% and place on the left front of the milkshake. Next, find and open tag #2 and reduce it by 90% and place it angled on the bottom right side of the milkshake. Now find and open the ribbon #1 and reduce it by 90% and place on the bottom right by the milkshake...duplicate and flip it vertically, duplicate again and flip it horizontally. Repeat this process on the left side above the cupcake.

Now, find and open the lace and reduce it by 90%. Keep duplicating and moving over, until you reach the end of the top of the tag. Now find and open the dots and reduce them by 70%. Keep duplicating and moving them around the tag, until you are happy with their placement. Now open button #1 and reduce it by 90% and place 1 on the bottom left between the tag and the flower, and slide it to the forefront...add another on the bottom right between the flower and the tag, and slide the tag to the forefront.

You did it! You now have finished this tag. You will need to add copy wright info to your tag, as it is the law. Finally, add a name in any font and color of your choosing.

I hope you enjoyed this tutorial. If you did, please follow my blog and pass it along to others. If you make a tag using this tutorial, please send it to meat robynebutts@gmail.com, so I can place it on my blog.

Hugs and blessings,

Robyne

Matching timeline cover I created using the Wild Cat scrap kit by Designs by Sarah, and the Princess tube by Misticheskaya

Preview of the awesome Wild Cat kit by Designs by Sarah!

Preview of the FREEBIE cluster frame I created using the Wild Cat scrap kit by Designs by Sarah.

FREEBIE cluster frame. You can download this frame by simply right-clicking on it, and then saving it to your computer. Please do not claim this as your own work; either link back here to my blog, or to the shop where this kit can be purchased...thank you!